White Acrylic Wall Protection Sheets - #A436

Availability:

• 55 sizes available
• Thicknesses available: 1/16", 1/8", 3/16", 1/4", 1/2"
• Color: #2447 Gloss White and #7328 Gloss White (see construction details)
• Acrylic (polyacrylate) is marketed under many trade names including Plexiglas, Lucite, Perspex, Policril, Gavrieli, Vitroflex, Limacryl, R-Cast, Per-Clax, Plazcryl, Acrylex, Acrylite, Acrylplast, Altuglas, Polycast, Oroglass, Optix.
• These differ from Lexan which is polycarbonate, and is sometimes used as bullet-proof glass. Although it is more shatter-resistant, it is more expensive than acrylic, yellows with prolonged exposure to sunlight, and is much more easily scratched. Therefore acrylic is more ideal for most interior and exterior design purposes.

Recommended Uses:

• We recommend using drill bits safe for plastic sheets.

  • Recommended Click Here!Plas Drill Bit

Construction Details:

• White acrylic sheets are also known as plexiglass or Polymethylmethacrylate (PMMA)
• #7328 white acrylic sheet light transmission: 1/8'=31%, 3/16'=23%, 1/4'=17%
• #2447 white acrylic sheet light transmission: 1/8'=50%, 3/16'=42%, 1/4'=35%, 1/2'=19%
• Please note: light transmission of white plexiglass sheets (also known as white acrylic plate) change with thickness. Therefore 1/8" 2447 lighting white will transmit more light than 3/16" 2447. Basically the thicker the white, the less the light transmitted. This is true with all white and translucent color sheets. There may be small differences in color between manufacturers and between batches, but the colors do not change with thickness.
• Measurements are in Nominal Size - sheet sizes can vary from manufacturer and some are cut from larger sheets, sizing may be +/- saw cut
• Thickness tolerances are +/- 10% on acrylic sheets and can vary throughout the sheet. Normal variance seen is less than 5%.
• Plexiglass is a common term used to describe acrylic. Plexiglas® is a registered brand name. The scientific name for plexiglass or acrylic is Polymethylmethacrylate (PMMA)
• For higher impact resistance than acrylic check out KSC's polycarbonate sheets.

More