Pegboard Bins and Parts Organizers - #A1509

Hi Melissa, Thank you for your question. This product works well with our Outdoor Rubber Stair Treads (A60512) mounted over wood. Here is a link to the treads, https://kofflersales.com/p/stair-treads-outdoor-use.asp?cid=65 Thank you, The Koffler Team

Hi Susan, Thank you for your question. Yes, the cartridges are reusable. The shipping time would be approximately 5-7 days. Than you, The. Koffler Team

Hi Garron, Thank you for your question. Nose epoxy is always recommended for a factory installation. You can purchase the nose calk in a 2 part quart that you can mix together and apply with a putty knife. Also, you would need to buy the adhesive to adhere the complete the stair treads to the wooded stairs. Thank you, The Koffler Team

Hi Gregg, Thank you for your question. The product should stay good while you install a couple of stairs per night. Just make sure you seal the can and/or cartridge. As for the amount, it will depend on the linear feet of each step. Without knowing the exact width, it's hard for us to tell. Here is our recommendation, 1/2 in. bead of approx 40 lin. ft. per two part quart unit, 1/4 in. bead of approx. 50 lin. ft. per dual cartridge. Also, feel free to call our product specialists on Monday. Thank you, The Koffler Team

Hi Gary, Thank you for your question. Unfortunately, we don't have a video. However, you can either apply with the cartridge applicator or putty knife to the inside radius of tread nose Thank you, The Koffler Team

Hi Mary, Thank you for your question. Yes, this caulk would be the perfect solution to fill the damaged stairs. Thank you, The Koffler Team