MAPEI® Ultrabond Eco® 360 Adhesive for Vinyl Sheets, Tile and Plank - #A4618

Availability:

• Sizes: 1 gallon and 4 gallon containers

Construction Details:

• High-performance adhesive for homogeneous sheet vinyl (solid PVC sheet flooring), luxury vinyl tile (solid PVC tile) and vinyl plank installation
• Plasticizer migration resistant for use with all solid vinyl flooring
• Indentation and shrinkage resistant
• Ready to use - no mixing necessary
• Quick, easy installation with trowel
• Great for interior residential, commercial and institutional applications
• Low volatile organic content
• CRI Green Label Plus #GLP12617
• RFCI IP #1, Recommended Installation Practice for Homogeneous Sheet Flooring.
• Using this product may help contribute to LEED certification of projects, see product data sheet below for more details.
• For use in interior applications only
• Do not install over any substrate containing asbestos.
• Use only when the substrate temperature is between 50°F and 90°F (10°C and 32°C).
• Do not install nonporous flooring products over nonporous surface.
• Do not apply over any cutback adhesive or any other adhesive residues
• Do not install when moisture vapor emission rate (MVER) exceeds 5 lbs. per 1,000 sq.ft. per 24 hours, when using the anhydrous calcium chloride test (ASTM F1869)
• Do not install when relative humidity of concrete slab exceeds 80% (ASTM F2170)
• All substrates must be dry and structurally sound and stable
• Suitable Substrates: exterior-grade plywood (Group 1, CC type); approved wood underlayments (per manufacturer recommendations; cement-based self-leveling underlayments and patching compounds; concrete and properly prepared terrazzo; radiant-heat systems that have been properly installed; gypsum underlayments that have been properly prepared and primed and meet ASTM F2419 requirements for compression; embossing levelers applied over existing properly prepared and fully bonded ceramic tile and fully bonded vinyl composition tile (VCT) Note: Must be one layer only.
• Before installation substrates must be clean and free of dust, dirt, oil, grease, paint, curing agents, concrete sealers, loose bonded toppings, loose particles, old adhesive residue, and any other substance or condition that may prevent or reduce adhesion.
• All surfaces must be level, even, flat and smooth prior to installation.

More