MAPEI® Ultrabond Eco™ 185 Carpet Adhesive - #A4619

Availability:

• Sizes: 4 gallon container

Construction Details:

• High-performance adhesive used by commercial carpet installers
• Fast grab to hold carpet in place during installation
• Low odor formula can be used in occupied buildings
• Mid-range solids level for a more durable bond
• High moisture resistance - up to 8 lbs. (3,63 kg) MVER
• Ready to use - no mixing necessary
• Great for interior residential, commercial and institutional applications
• CRI Green Label Plus #GLP84381
• CRI # 104, Standard for Installation Specification of Commercial Carpet
• CRI #105, Standard for Installation of Residential Carpet
• Using this product may help contribute to LEED certification of projects, see product data sheet below for more details.
• For use in interior applications only
• Do not install over any substrate containing asbestos.
• Use only when the substrate temperature is between 50°F and 90°F (10°C and 32°C).
• Do not use when the ambient relative humidity exceeds 65%
• Do not install nonporous flooring products over nonporous surface.
• Do not use to install solid vinyl flooring or vinyl backed carpet products
• Do not apply over any adhesive residues including cutbacks
• Do not install when moisture vapor emission rate (MVER) exceeds 8 lbs. per 1,000 sq.ft. per 24 hours, when using the anhydrous calcium chloride test (ASTM F1869)
• Do not install when relative humidity of concrete slab exceeds 90% (ASTM F2170)
• All substrates must be structurally sound, stable and dry
• Suitable Substrates: exterior-grade plywood (Group 1, CC type); approved wood underlayments (per manufacturer recommendations; cement-based self-leveling underlayments and patching compounds; concrete and properly prepared terrazzo; radiant-heat systems that have been properly installed; gypsum underlayments that have been properly prepared and primed and meet ASTM F2419 requirements for compression; embossing levelers applied over existing properly prepared and fully bonded ceramic tile and fully bonded vinyl composition tile (VCT) Note: Must be one layer only.
• Before installation substrates must be clean and free of dust, dirt, oil, grease, paint, curing agents, concrete sealers, loose bonded toppings, loose particles, old adhesive residue, and any other substance or condition that may prevent or reduce adhesion. All surfaces must be level, even, flat and smooth prior to installation.

More