3" Economy Notched Spreader-this spreader has polished spring-steel blades. Deep "V" notched 1/8" W x 1/8". Perfect for spreading top set base or for general use.
Round Edge Seam Roller-Is used to hand roll the base after adhesive is applied and base is in position. It insures important adhesive transfer between base and wall.
Top set Gouge-Is used for making tight outside corners. Without adhesive, position the cove base at the corner and pencil line back of base where bend is desired. Lay base on floor, back side up and use tool to gouge a shallow notch along pencil line.
Deluxe Dividers-Dividers are used for making tight inside corners. Position another piece of base, without adhesive about 1" from installed piece. Move the dividers downward in a straight vertical motion. At the same time, place adequate pressure on the pointer end to transfer and/or scribe the profile onto the surface of the uninstalled piece. Cut scribed pattern, apply adhesive and position new piece.
Cove Base Utility Knife (blade not -Features an easy-to-grasp thumb knob for quick opening without a screwdriver, and ample leverage for tightening securely. Cast of lightweight aluminum, with a knurled, anti-slip, brightly polished surface.
4" Reusable Cove Base Nozzle-Use on 4" Cove Base. No side leakage. Disassemble for easy cleaning Dispensing 11 beads of glue
6" Disposable Cove Base Nozzle-This low-priced throwaway cove base nozzle evenly spreads adhesive. It attaches quickly onto the plastic tip of a cartridge. This nozzle lays down five beads for 6"base.