Johnsonite | Tarkett Vinyl Transition Adaptors - #A515

Hi Don, Thank you for your question. This is the product for radius shapes. https://kofflersales.com/p/slim-line-transitions.asp?cid=2584 It attaches to the floor with adhesive which is listed in the Specifications tab. However, it only is available in 12ft. sections. Thank you, The Koffler Team

Hi Eddie, Thank you for your question. This product can be used, however there can't be any moisture present and you have to use the recommended adhesive. Under the "Specifications" tab for A515 there are installation instructions. Please take a look at them to make sure your surface is consistent with their specifications. Thank you, The Koffler Team

Hi Elaine, Thank you for your question. Yes, this product can be used for tile and wood laminate flooring. The smallests radius that is recommended for this product and most products is no less then a 6ft. radius. Thanks, The Koffler Team

Hi Beverly, Thank you for your question. It is recommended that the radius be not less then 6ft. Unfortunately, because of the minimum radius it won't wor well. However, depending on your radius you may be able to use 2 pieces. Thank you, The Koffler Team

Hi Clay, Thank you for our question. Johnsonite recommends no less then a 6ft. radius for this product and the Slim Line. Thank you, The Koffler Team

Hi Ruth, Thank you for your question. It certainly depends on the thickness and the size of the separation would these be a solution? A1120, https://kofflersales.com/p/flexible-wood-grain-t-moldings.asp?cid=2584 OR A518, https://kofflersales.com/p/wheeled-traffic-transitions.asp?cid=2584 Thank you, The Koffler Team

Hi Cassie, Thank you for your question. Yes, you can use any of our transitions as long as the height of the surfaces fit the measurements of the transition. Here is a link that has all of our transitions, https://kofflersales.com/floor-edging.asp Thank you, The Koffler Team