Name: Roppe Rubber Reducers
Brand: Roppe
Price: 93.20 USD
Availability: InStock
Rating: 4.67 (18 reviews)

Can this reducer be used at the edge or ceramic tile on a garage door. Cars will be going over it?

Hi D. West, Thank you for your question. We believe if properly installed cars should be able to drive over it. However, if the product is exposed to the outdoors at all, it would not be a suitable product to withstand outdoor conditions. Thank you, The Koffler Team

Hi. I need a flooring transition strip that will go from laminate to vinyl sheet. There is no difference in height. The original transition strip was destroyed by a pet that no longer lives here. The problem is that I don't have tools to cut a thick piece of wood or metal and the transition strip requires an odd cut on one of the ends. Is this a suitable product for this type of job? Is it easily cut? What type of tool do I need? Also, can it be glued down? Thanks!

Hi Lynn, Thank you for your question. Yes, these products are made of Vinyl or Rubber and are very easy to cut with a utility knife. Also, these products can be glued down, we do offer the proper adhesive. Please measure the thickness on both ends of your flooring and use that as the primary gauge to what product is best for you. Please review the products on this page by copy and pasting this link or feel free to give one of our product specialists a call, 888.355.6287. https://kofflersales.com/floor-edging.asp Thank you, The Koffler Team

Can the rubber reducers be used to transition from a tile floor that is 1/2" higher then carpet flooring? If so, how do you keep it in place? Can you nail through it?

Hi Mark, Thank you for your question. Yes, they can be used as a transition. Here is the link for the recommended adhesive, we don't suggest you use nails. Thank you, The Koffler Team

Is this suitable for freight elevator transition where heavy equipment (scissor lift, pallet jacks, etc.) pass through. How is it installed on concrete? Is this hard rubber?

Hi Andy, Thank you for your question. Unfortunately, this product would wear down way too quickly if it was installed on a freight elevator. Please copy and paste this page for another product that might be more suitable. https://kofflersales.com/p/bold-step-stair-tread.asp?cid=21 Thank you, The Koffler Team

Hello, We had wood floor installed in our living room by some company. There is about half an inch transition between the wood floor and ceramic tile. the tile is taller. they installed wood t-mold transition piece which not only hurts our toes but also gets damaged easily while moving furniture. Do you have any suggestion for replacing wood t-mold? thanks in advance, Anna

Hi Anna, Thank your your question. Maybe take a look at our vinyl inserts for our Johnsonite T-molding. Not sure what groove size your's but measure it and see if our vinyl T molding will snap in and lay more flush. Here is the link, https://kofflersales.com/p/t-molding-adapters.asp?cid=2584 Thank you, The Koffler Team

Hi, I need to add a transition strip but the wooden ones are too high. I need something with a much lower profile. The strip length would need to be just over 7 ft. The gap between laminate floor and carpet is 1/4 in. both surfaces are level to each other. Which one of your products should I use and is the strip glued to laminate and carpet? Also, what color would match best with the oak laminate floor? Thank you

Hi Richard, Thank you for your question. Without knowing the thickness of the carpet and laminate it's a bit hard to tell. Please copy and paste this link and take a look at this profile CD-XX-C, https://kofflersales.com/p/t-molding-adapters.asp?cid=2584 There is a number of colors (click our color tab) to choose from, without seeing the Oak it's hard to recommend a color. Thank you, The Koffler Team

I am needing a transition from LVT to tile, LVT is about 5/8 higher than tile. Trying to find a 0-5/8 reducer. Which option would be best for this?

Hi Betsy, Thank you for your question. This product actually is your best option and the closest profiles would be #20 or #49. They are both only 1/16" off but that's the closest size that is made. Thank you, The Koffler Team

Do you sell the Roppe 535U adhesive that is used for the rubber reducer strips (#A525)? Thanks.

Hi Bruce, Thank you for your question. Yes, we sell the Roppe 535U and 528 of the same price. Please mercy specify in the "Additional Instructions" section of the shopping cart. Thank you, The Koffler Team

vinyl sheet 1/16 thick laid on hardwood floor on kitchen area. Need transitional reduser from vinyl and wood.Does this rubber reducer # A528 can be use. If yes, has self adhesive?

Hi Roman, Thank you for your question. Yes, it can be installed from wood to vinyl, if the size is correct. However, please review the installation instructions first, located under the Specifications Tab. The product is not a self-adhesive product, here is a link to the prober adhesive, https://kofflersales.com/p/stair-tread-epoxy-adhesive.asp Thank you, The Koffler Team

I want to buy Roppe Rubber Reducers - #24 with color(174) How long will you delivery to Los angeles. zip: ca 90621

Hi Noah, Thank you for your question. It depends on color and weather that profile/color is in stock. Please feel free to give us a call during business hours tomorrow and we'll be more then happy to check stock for you. Thank you, The Koffler Team

Hello I am looking for a transition piece for my pergo flooring. I have pergo flooring in the kitchen leading into same pergo flooring in the dining room. The need for the transition piece is because there is a slight slope down where the kitchen and dining room meet. Any help or information on what you can recommend I use, would be greatly appreciated. Thank you.

Hi Jeff, Thank you for your question. The product that you were on is a good option in profile #45 #59. When choosing a reducer the main specification to keep in mind is the thicknesses of the flooring. Here are a few other choices. Please copy and past these links, https://kofflersales.com/p/roppe-wheeled-traffic-transitions.asp?cid=2584 https://kofflersales.com/p/reducers.asp?cid=2584 https://kofflersales.com/p/roppe-wheeled-traffic-transitions.asp?cid=2584 Thank you, The Koffler Team

can this be installed along a curved transition?

Hi, Thank you for your question. Unfortunately, it can not be installed along a curve. Thank you, The Koffler Team

We are replacing some missing indoor/outdoor carpet on our porch of our new home. Previous owners had what I'm guessing is vinyl edging installed on the existing carpet. Is this the product I need to finish the installation? The carpet is over concrete. We want it to look cohesive, so I'm guessing we'll also have to replace their existing edging so it's all the same color. Any suggestions would be appreciated. And it's installed with a glue? Similar to the carpet glue?

Hi Sharon, Thank you for your question. Unfortunately we do not recommend vinyl or rubber edging to be used outdoors. However, we have had some customers use them in the same application you are talking about. Here is a nice edging that may work. Please copy and paste this link, https://kofflersales.com/p/roppe-carpet-edging.asp?cid=2584 Thank you, The Koffler Team

I'm looking at the spec sheet for the Roppe rubber reducer #24, and it says it comes in "16 9-ft. sections per tube (144 ft.)" Is this how you are selling it (per tube), or are you selling it per 9-ft section?

Hi Jesse, Thank you for your question. We sell the Roppe reducer #24 in 9ft. sections by the piece. You do not have to buy 16 at a time. Thank you, The Koffler Team

I have reconverted a garage back to a garage. We have sheet vinyl flooring. I would like to find a drivable edging to protect the vinyl edge . The Vinyl is about 1/8" Recommendation?

Hi Richard, Thank you for your question. You can use this product, but it will be important that the sheet vinyl is glued down to the concrete first and then apply this edging. However, in addition to applying it with adhesive. We would also recommend to screw it down if your garage is going to experience any material change in heat or cold. Thank you, The Koffler Team

Description /Size	Style	Options	Price	Quantity
Profile 20, 9 ft., 7/16"	Transitional Reducer	Select Options	$93.20- each	Add Add

Profile 21, 9 ft., .080"	Reducer Strip-Resilient Floor	Select Options	$25.72- each	Add Add

Profile 22, 9 ft., 1/8"	Reducer Strip	Select Options	$30.21- each	Add Add

Profile 23, 9 ft., 3/16"	Reducer Strip	Select Options	$32.38- each	Add Add

Profile 24, 9 ft., 1/4"	Reducer Strip	Select Options	$41.31- each	Add Add

Profile 25, 9 ft., 5/16"	Reducer Strip	Select Options	$50.01- each	Add Add

Profile 26, 9 ft., 3/8"	Reducer Strip	Select Options	$57.73- each	Add Add

Profile 45, 9 ft., 1/8"	Reducer Strip	Select Options	$31.96- each	Add Add

Profile 48, 9 ft., 3/32"	Reducer Strip	Select Options	$27.89- each	Add Add

Profile 49, 9 ft., 9/16"	Transitional Reducer	Select Options	$108.53- each	Add Add

Profile 59, 9 ft., 1/8" Tapering to .080"	Reducer Strip	Select Options	$30.50- each	Add Add

Search Results for ""