MAPEI® Type 1™ Professional Tile Adhesive - #A4611

Availability:

• Available in the following sizes: 1 qt. pail, 1 gallon pail, 3.5 gallon pail

Construction Details:

• Professional grade acrylic adhesive Non-flammable Low in odor and VOCs
• Ready to use - no mixing required
• Smooth, easy to spread
• Extended open time
• Meets or exceeds A136.1, Type 1 ANSI Standards
• ISO 13007: Classification D1TE
• Adhesive for installation of tiles 6" x 6" floor tiles, and 12" x 12" wall tiles
• May be used on tub and bath surrounds where service requirements do not exceed ANSI A136.1 Type 1
• For the installation of tile on walls in intermittent wet conditions such as tub and shower surrounds
• For use with most types of unglazed ceramic and porcelain tile, and ceramic and porcelain mosaics for walls and floors
• Do not use to set natural stone
• Not for use: over substrates containing asbestos, for exterior applications, in steam rooms, on shower floors or subject to water immersion
• Do not apply over waterproofing, crack isolation or uncoupling membranes; or over particleboard, Masonite, oriented strand board (OSB), Lauan, gypsum floor-patching compounds, metal or similar dimensionally unstable substrates
• Do not use for setting bathroom fixtures and grab bars
• Suitable Substrates: fully cured concrete, masonry block, cement mortars and leveling coats, cement backer units, gypsum wallboard (interior dry walls only), APA or CANPLY group 1 exterior plywood (interior residential floors and countertops in dry areas)
• For use in temperatures between 40°F and 95°F
• Clean-up: You will need to use water if the adhesive is still wet and mineral spirits of the adhesive is dry

More