Magnetic Wall Panels & White Board - #A427

Hi Bill, Thank you for your question. Yes, custom sizes are available, and a 3' x 4' Bone White panel would cost $162.73. If you would like to place an order, please give us a call and ask for Emily. Thank you, The Koffler Team

Hi Christine, Thank you for your question. Yes, mounting screws are included. For installation instructions you can go to our Specifications Tab under the left box called Availability, and click the PDF file called, Magnetic Panel Installation Instructions. Thank You, The Koffler Team

Hi Renee, Thank you for your question. The Steel Galvanized are magnetic, but not dry erase. The magnetic dry erased only comes in white. Thank you, The Koffler Team

Hi Chris, Thank you for your question. The colors are protected from "normal" use. However beyond "normal" use, for example scraping or scratching the panel with the magnets could possibly cause it to remove the color. Thank you, The Koffler Team

Hi Alyssa, Thank you for your question. We have a small sample we can send you for free. I will forward your request to our sample department, and they will be in contact with you. Thank you, The Koffler Team

HI Allison, Thank you for your question. Yes, our sample department will be in contact with you for your address. Thank you, The Koffler Team

Hi Marc, Thank you for your question. Yes, the Stainless Steel panels can be installed outside. Thank you, The Koffler Team

Hi Maria, Thank you for your question. We recommend mounting with screws. However, it may be possible to frame and use a picture wire to hang. Or you may try using a picture wire without a frame, as there are drilled holes that you can tie the wire to. Thank you, The Koffler Team

Hi Hatti, Thank you for your question. The dry erase markers work only on the magnetic white board. However, the first item on this page is a set of wet erase markers and they work great on Stainless Steel. Thank you, the Koffler Team

Hi Gary, Thank you for your question. No special instructions just make sure you use an electric saw and blade that cuts steel. Thank you, The Koffler Team

Hi Maria, Thank you for your question. These 2 products will ship rolled. The 2' x 4' weights 11lbs. and the 2' x 6' weights 17lbs. Thank you, The Koffler Team

Hi Mary, Thank you for your question. Yes, any part of the board will get hot when it's exposed to the sun. Thank you, The Koffler Team

Hi Ben, Thank you for your question. Unfortunately, we would not recommend paint being applied to this product. Thank you, The Koffler Team

Hi Nicole, Thank you for your question. The edges are smooth and should not be problem. Thank you, The Koffler Team

Hi Janelle, Thank you for your question. All of them are magnetic. However, the panels that say Dry Erase are the only ones that are dry erase. Thank you, The Koffler Team

Hi Peyton, Thank you for your question. We can create custom sizes, however the height has to be no larger then 48" So we can manufacturer a panel 48"h x 114"w (9.5'). If that's OK, please feel free to call us for a quote or send an e-mail to Bob@kofflersales.com. Thanks you, The Koffler Team

Hi Ronald, Thank you for your question. The steel colors are pretty durable and with normal use should not scratch. However, if someone deliberately tries to scratch the surface it will show damage. Yes, stainless steel is more durable and can be installed outside if necessary. Thank you, The Koffler Team

Hi Heidi, Thank you for your question. 1) The only difference is the square corners allow you to drill your own holes anywhere on the panel. 2) It's not likely the magnets will scratch the surface if lifted correctly. 3) Yes the panel will flatten out nicely. Thank you, The Koffler Team

Hi Dr. Waldorf, Snap covers do not come with the product. Thank you, The Koffler Team

Hi Susan, Thank you for your question. We believe it's Stainless Steel with some reflections from the surrounding area in it. Thank you, The Koffler Team

Hi Joan, Thank you for your question. Unfortunately we do not carry a board that is magnetic on the back. You may want to try using an industrial type of peel-and-stick adhesive or velcro. Thank you, The Koffler Team

Hi Scott, Thank you for your question. We can provide customer cut sizes, however the width and height both can't be greater than 48". But one side can. Thank you, the Koffler Team

Hi A. Nevore, Thank you for your question. If you are planning to butt-up panels next to each other there's no reason for any special product. They should butt-up nicely. Thank you, The Koffler Team

Hi Gil, Thank you for your question. Yes, we can create a custom size 60" x 19 1/4" with a tolerance: +/- 0.063". Please feel free to phone (888.355.6287) your order in or send the specifications and type of metal to bob@kofflersales.com Thank you, The Koffler Team

Hi Jim, Thank you for your question. The thickness is .030". The steel is on the edges as well since it's all one sheet. Thank you, The Koffler Team

Hi Marsha, Thank you for your question. Yes, your magnetic pieces should work fine on these panels, as long as your magnets still have power. Thank you, The Koffler Team

Hi Eric, Thank you for your question. These panels work with all magnets. We also sell various magnets located on this product page. Thank you, The Koffler Team

Hi Darcey, Thank you for your question. The brushed stainless steel can only be used with wet erase markers, which is on this product page. Yes, brushed stainless steel is the natural color and not painted on. Thank you, The Koffler Team

Hi Ali, Thank you for your question. If you're installing anything over the metal it would not be magnetic. Thank you, The Koffler Team

Hi Carol, Thank you for your question. Most of the time we recommend some kind of thin plywood support board. However, for this smaller size there is a good chance it will display nicely, but the only way to tell would be to test one first. Or just be prepared that a worst it will need a thin piece of plywood support. Thank you, The Koffler Team

Hi Luanne, Thank you for your question. Yes, depending on what you are looking for we do offer custom sizes. Please feel free to send your request to, rfq@kofflersales.com or feel free to call us when we open tomorrow morning. Thank you, The Koffler Team

Hi Emily, Thank you for your question. We have not heard of any problems what so ever with electronic interference. In fact, we have several panels in our facility and have never had a problems. Thank you, The Koffler Team

Hi Susie, Thank you for your question. The wet erase markers can be used on any metal panel including the colored. However they can’t be used on the magnetic dry erase board. Thank you, The Koffler Team

Hi Ann, Thank you for your question. The product weighs 6 pounds. Since we have never tested this type of mounting we unsure if the Velcro stripes will hold it in place. Maybe it's best to check the weight capacity of the strips. Thank you, The Koffler Team

Hi Angelique, Thank you for your question. Unfortunately, we only have Black wet erase. However, we can make the size you are looking for. If you would like a quote, please either give us a call during business hours or e-mail us at RFQ@kofflersales.com Thank you, The Koffler Team

Hi Andrea, Thank you for your question. Unfortunately one side can not be longer then 4'. So the closest size would then be a 4' x 8'. If you don't mind having 2 pieces which includes a 1' x 8' and a 4' x 8', then you would add the 2' x 8' and the 4' x 8' to the cart and in the Special Instructions mention for us to cut the 2' side in half. Thank you, The Koffler Team

Hi Jim, Thank you for your question. 1) As long as the magnets are not dragged or gouged across with firm pressing movements they won't scratch. 2) The way you can determine a quote is to click the size that is larger then the size you would like IE the 2=20" x 48" would be one 48" x 48". etc.. Then in the shopping cart, in the "Special Instructions" area please specify the exact sizes and we will cut to your specifications for no extra cost. Thank you, The Koffler Team

Hi Robert, Thank you for your question. The panels are pretty strong. You certainly can affix a magnetic knife rack, and depending on the size of the pot we have had customers affix those as well. Thank you, The Koffler Team

Hi Nancy, Thank you for your question. Yes, they can be cut for outlet switches, but not at our factory. You can do it on site with an electric saw and a blade used to cut sheet metal. Thank you, The Koffler Team

Hi W Chen, Thank you for your question. It's still not advisable to paint the material. You can purchase a smaller size and try painting it to see if the magnets work and the paint doesn't scratch off. Unfortunately, there are no custom color options available. Thank you, The Koffler Team

Hi Paul, Thank you for your questions. The Bone White and City Grey are more on the Matt side. How much does a 2' x 6' panel weigh? = 10lbs. How much does a 2' x 10' panel weigh? = 16lbs How much does a 4' x 6' panel weigh? = 19lbs. Thank you, The Koffler Team

Hi Robin, Thank you for your question. Unfortunately the panels are not magnified. Thank you, The Koffler Team

Hi Jennifer, Thank you for your question. Some customers choose to use an easel or build a frame around the panel and hang it off the frame so it can be removed later. However, most choose to use the mounting screws. Thank you, The Koffler Team

Hi Michael, Thank you for your question. Unfortunately, it is shipped from our manufacturing facility in PA and because of it's size it contains a Fedex oversized surcharge. However, we can provide square corners. Please note that in the Special Instructions section of your order. The panel can be glued to the wall or you can request holes for an additional charge (please specify in the Special Instructions) Thank you, The Koffler Team

Hi Theresa, Thank you for your question. For the steel board you purchased, the wet erase markers are what is supposed to be used. If so, you would use a damp cloth to wipe the board. If by accident you used the dry erase markers, than also try a damp cloth. Thank you, The Koffler Team

Hi Paul, Thank you for your question. First make sure you are using Wet Erase markers and then use a wet/damp rag or paper towel to erase. Thank you, The Koffler Team

Hi Venessa, Thank you for your question. We're sorry, I thought someone already sent you an answer to this. We do offer a selection of magnets at the bottom of this product page. We don't offer any magnetic paper, however that should work fine. Yes, they fit together fairly seamlessly. However, you still can see the seam, it doesn't quite completely disappear. Thank you, The Koffler Team

Hi KArin, Thank you for your question. What a great idea. Yes, they should work nicely, as long as you're putting spices on the shelves. Just be careful of too much weight. Thank you, The Koffler Team