Roppe Corner Guards Rubber and Vinyl - #A693

Hi Doug, Thank you very much for your question. No this product isn't available in 7ft. lengths. However, please visit these 2 products, the first one is available in 8ft lengths (you can cut it to 7ft.)and the second product is available in custom lengths, which includes 7ft. https://kofflersales.com/p/johnsonite-millwork-corner-guards.asp?cid=56 https://kofflersales.com/p/heavy-duty-corner-guards.asp?cid=56 Thank you, The Koffler Team

Hi Mike, Thank you for your question. Please send us your address and the colors you want to see, we will send you samples at no charge. Please e-mail us at, samples@kofflersales.com Thank You, The Koffler Team

Hi Frank, Thank you for your question. We are very sorry you received the wrong color and would love to assist you. If you would like, either give us a call on Monday (888-355-6287) and let us know what color you would like, or feel free to send us an e-mail at, order@kofflersales.com. In both cases we will provide you a no charge exchange. Thank you, The Koffler Team

Hi Chris, Thank you for your question. These will have a little flex, however we don't believe it will fit a 3/4"bullnose corner. If you would like to receive a sample, please e-mail your information to, samples@kofflersales.com. Also, please look at this product, it comes in a bullnose corner, https://kofflersales.com/p/corner-guards-textured.asp?cid=56 Thank you, The Koffler Team

Hi Robert, Thank you for your question. Please click on the "Specifications" tab for this product and on the right you will see installation instructions. On the left is a link for the rubber adhesive. Also, here is a direct link for that adhesive, https://kofflersales.com/p/stair-tread-epoxy-adhesive.asp Thank you, The Koffler Team

Hi Berh N, Thank you for your question. It is firm rubber and may flex a bit. However, the best solutions for steps are our Stair Nosings. Here is a link to that product category. https://kofflersales.com/stair-nosing.asp Thank you, The Koffler Team

Hi Paul, Thank you for your question. Yes, the Rubber corner guard will hold up fine. For color selection please return back to this product page and you will see a tab labeled, "Colors". Select that tab and you'll see the various colors. Thank you, The Koffler Team

Hi Michel-Jean, Thank you for your question. Yes, it can be installed over ceramic tile in outdoor applications. However, we would specifically recommend the Rubber corner guard vs. the Vinyl for this intended use. Thank you, The Koffler Team

Hi Cheryl, Thank you for your question. If you click on the color tab you can see a selection of many colors, of which Grey is one. Also, please take a look at this product even though it doesn't come in Grey, A1303 https://kofflersales.com/p/safety-foam-bumper-guards.asp?cid=850 A concern would be if there's any heat exposure to the product which may cause a safety issue. Thank you, The Koffler Team

Hi Lisa, Thank you for your question. Yes, you can screw them to your garage walls, please make sure you use screws that are specific to the type of walls. Also, use washers on the outside of the corner guards to keep them in place. Thank you, The Kofller Team

Hi Kim, Thank you for your question. We would not recommend installing this product on a 135 degree corner. However, for a 45 degree corner you would use our adhesive which is listed in the Related Products tab on this product page. Also, here is a link to a comparable product which is offered in a 135 degree application, https://kofflersales.com/p/inpro-flexible-corner-guards.asp?cid=2590 Thank you, The Koffler Team

Hi Belle, Thank you for your question. Since there’s both rubber and vinyl corner guards on this page. We show two different adhesives, one for rubber and one for vinyl. The rubber adhesive is to be used exclusively for our rubber corner guards. Thank you, The Koffler Team

Hi Bridget, Thank you for your question. Unfortunately, the backside is not finished the same it is quite raw looking. Thank you, The Koffler Team

Hi Scott, Thank you for your question. Unfortunately. these corner guards are not made for inside corners. Some of our customers have used this product for inside corners. https://kofflersales.com/p/corner-guards-clear-and-colored.asp?cid=56 Thank you, The Koffler Team

Hi Gabriella, Thank you for your question. It all depends on the color and our inventory, we will have one of our product representatives reach out to you first thing this morning. Thank you, The Koffler Team

Hi Maurice, Than you for your questions: 1) They can be cut using a utility knife or a chop saw (preferably a chop saw for an easier cut). 2) They can be screwed to a surface by drilling a hole through them first. Unfortunately we can't give much advice on drilling and inserting supports into brick. Thank you, The Koffler Team