Roppe Corner Guards Rubber and Vinyl - #A693

Do you have any questions about this product? Call (888)355-6287, or email us.

Hi! We are purchasing the Rubber Corner Guards and would like to confirm what would be the best adhesive to use on a drywall covered metal column for a daycare. The two links below were what popped up as recommended, but I wanted to know which one would be less volatile. Additionally, will the vinyl adhesive work for the rubber one? Thank you! https://kofflersales.com/p/stair-treads-and-corner-guard-adhesive.asp?lc=P OR https://kofflersales.com/p/stair-tread-epoxy-adhesive.asp?lc=P

Hi Belle, Thank you for your question. Since there’s both rubber and vinyl corner guards on this page. We show two different adhesives, one for rubber and one for vinyl. The rubber adhesive is to be used exclusively for our rubber corner guards. Thank you, The Koffler Team

How do you install this on a 135% corner, 45% wall.

Hi Kim, Thank you for your question. We would not recommend installing this product on a 135 degree corner. However, for a 45 degree corner you would use our adhesive which is listed in the Related Products tab on this product page. Also, here is a link to a comparable product which is offered in a 135 degree application, https://kofflersales.com/p/inpro-flexible-corner-guards.asp?cid=2590 Thank you, The Koffler Team

We are thinking of these to protect two corners in our garage, but we don't want to adhere them to the corners in the event we want to remove them some day. Can we screw them into the garage walls?

Hi Lisa, Thank you for your question. Yes, you can screw them to your garage walls, please make sure you use screws that are specific to the type of walls. Also, use washers on the outside of the corner guards to keep them in place. Thank you, The Kofller Team

I’m looking for foam bumper material for the edge of a stainless steel vent over a stove. My boyfriend keeps hitting his head. Want as small profile as possible. What sizes and colors would you recommend? Do you have a gray that would blend with stainless? If not, black would work.

Hi Cheryl, Thank you for your question. If you click on the color tab you can see a selection of many colors, of which Grey is one. Also, please take a look at this product even though it doesn't come in Grey, A1303 http://kofflersales.com/p/safety-foam-bumper-guards.asp?cid=850 A concern would be if there's any heat exposure to the product which may cause a safety issue. Thank you, The Koffler Team

Can this product be applied to ceramic tile surfaces in outdoor applications?

Hi Michel-Jean, Thank you for your question. Yes, it can be installed over ceramic tile in outdoor applications. However, we would specifically recommend the Rubber corner guard vs. the Vinyl for this intended use. Thank you, The Koffler Team

Looking to use your product on a wood deck edge that is over my above ground pool. I would need about 7 of the 54" sized pieces. Do you think this would hold up and I'd like to see a color chart of the many colors available..thanks

Hi Paul, Thank you for your question. Yes, the Rubber corner guard will hold up fine. For color selection please return back to this product page and you will see a tab labeled, "Colors". Select that tab and you'll see the various colors. Thank you, The Koffler Team

i have a curved step that I need something like this to go around the top edge of, Is this flexible enough to curve around the top edge?

Hi Berh N, Thank you for your question. It is firm rubber and may flex a bit. However, the best solutions for steps are our Stair Nosings. Here is a link to that product category. http://kofflersales.com/stair-nosing.asp Thank you, The Koffler Team

I am looking at getting the rubber corner guard for my garage. The corner I will be installing this on is all brick. I assume the corner guard itself will be fine, but what is the best way to attach it? Can these be screwed on? If not, what is the best adhesive? Thanks.

Hi Robert, Thank you for your question. Please click on the "Specifications" tab for this product and on the right you will see installation instructions. On the left is a link for the rubber adhesive. Also, here is a direct link for that adhesive, http://kofflersales.com/p/stair-tread-epoxy-adhesive.asp Thank you, The Koffler Team

I have bullnose corners in my house, also off angled. Will either one flex for sharper angles, and fit over 3/4" radius corners?

Hi Chris, Thank you for your question. These will have a little flex, however we don't believe it will fit a 3/4"bullnose corner. If you would like to receive a sample, please e-mail your information to, samples@kofflersales.com. Also, please look at this product, it comes in a bullnose corner, http://kofflersales.com/p/corner-guards-textured.asp?cid=56 Thank you, The Koffler Team

I just received my order and it is the wrong color. How do I go about exchanging it for the correct color?

Hi Frank, Thank you for your question. We are very sorry you received the wrong color and would love to assist you. If you would like, either give us a call on Monday (888-355-6287) and let us know what color you would like, or feel free to send us an e-mail at, order@kofflersales.com. In both cases we will provide you a no charge exchange. Thank you, The Koffler Team

I'm finishing a Child Care restroom for Toddlers and need a corner guard that is durable while slightly "giving" when little heads bump it. I think your Vinyl Corner Guard #A693 1-1/2" x 1-1/2" is what I'd like. But how do I select the right color? My wall color is Miller 0239 Tailored Tan. Or if I find a comparable "PMS" color you can tell me which material is closest? Or do I buy 3 or 4 sticks of what appears to be best, then return the 3 that don't match and buy 9 more (I have 10 corners that are 44" tall.) Thanks for advice.

Hi Mike, Thank you for your question. Please send us your address and the colors you want to see, we will send you samples at no charge. Please e-mail us at, samples@kofflersales.com Thank You, The Koffler Team

do these come in 7 foot lengths

Hi Doug, Thank you very much for your question. No this product isn't available in 7ft. lengths. However, please visit these 2 products, the first one is available in 8ft lengths (you can cut it to 7ft.)and the second product is available in custom lengths, which includes 7ft. http://kofflersales.com/p/johnsonite-millwork-corner-guards.asp?cid=56 http://kofflersales.com/p/heavy-duty-corner-guards.asp?cid=56 Thank you, The Koffler Team

• 

• Rubber or Vinyl corner guards offers excellent wall protection against corner damage. Both flexible rubber and vinyl provide an excellent solution from hard impacts.

Sort By: Newest First Oldest FirstHighest RatedLowest Rated
33 Reviews		Page :    1 of 4    1234

Great on deck edges

Written by: - Spcschultz 5/5/2019

5 / 5 stars

Used this as a 'safety' bumper on our exposed deck edges. So far so good, looks better than those black loading dock bumpers and I was able to match the color to our deck stain very closely. Pretty neat product for the money.
-------------------------------------------------------
Hi Spcschultz,

Thank you for your review. We are thrilled our Corner Guards look great and work well as a safety bumper.

Thank you,


The Koffler Team

Great corner protectors

Written by: - NERYC 2/4/2019

5 / 5 stars

We used this product for a very unusual purpose - - we adhered it to the front edges of some small sailboats we used for teaching kids to learn to sail. The edges always seem to get banged up by our beginner students who have a habit of running into things, and these rubber edge protectors will do a great job eliminating a lot of fiberglass repair work we seem to have to do when the edges aren't protected. These corner guards have just enough bend to adhere tightly to the shape of the hull, even though it isn't as 90? or vertical like a wall application. Very happy!
------------------------------------------------------------

Hi NERYC,

Thank you for your very detailed review. That is certainly a unique solution. Wow, and such a great idea. If you have any pictures we would love to see the application. Please forward any images to customerservice@kofflersales.com

Thank you,


The Koffler Team

Amazing quality!

Written by: - Rubber corner protectors 12/24/2018

5 / 5 stars

Excellent product, exceded my expectations
--------------------------------------
Hi,


Thank you very much for your review. We appreciate the kind words concerning our product and glad we exceeded your expectations.

Thank you,


The Koffler Team

Excellent Product

Written by: - Home Handyman 12/4/2018

5 / 5 stars

I purchased the vinyl guards for a novel purpose.
They now provide privacy along the vertical edges of a window blind.
Very pleased with the quality of the product.
Would prefer much speedier delivery than four weeks though.
Will definitely consider using this product again.
------------------------------------
Hi Home Handyman,

Thank you of your review. We appreciate your feedback concerning the shipping time. Each of these products are made to order and that allows Roppe the abilities to manufacturer over 75 brilliant colors. Also, thank you for the kind words concerning the quality of the product as well.

Thank you,


The Koffler Team

awesome corner guard

Written by: - maintenance man 4/16/2018

5 / 5 stars

hard to find a tough yet flexible corner guard that was not too wide, this did the job great, and actually we painted it and it takes paint well and does not flake right off like a lot of plastics

Good Product

Written by: - FtownSteve 4/9/2018

4 / 5 stars

Just as expected. Easy to cut

Great Stuff

Written by: - bobby 4/6/2018

5 / 5 stars

Great material, very durable and looks nice.

Guarded Edge

Written by: - Stevengee 3/22/2018

5 / 5 stars

Using on counter top edge,in front of double sink.Very nice product!

Worked great for what I needed!

Written by: - LE8864 12/14/2017

5 / 5 stars

I got a rubber corner guard, my dog was continuously scratching at the door and frame, I bought a kick plate and mesh piece for the door which worked but I needed something to block the frame. I nailed this on and she hasn’t been able to harm it in any way! And trust me, she’s tried. Only drawback is how long it took to ship, but it was worth it.

Great for trimming a deck/

Written by: - Abbeyroad 9/3/2017

5 / 5 stars

I used these corner guards for trimming a deck with Veranda composite decking. The color match perfectly and it made my project look fantastic. This product was very easy to cut and apply.

33 Reviews

Page :    1 of 4