Wall Base Adhesive - #A404

Do you have any questions about this product? Call (888)355-6287, or email us.

How many cartridges do i need to install 120 feet of the 4'' base?

Hi Jerry, Thank you or your question. Here are the applications specs: Approximate Trowel Application 2 1⁄2"= 310 - 340 LF / Gallon 4" = 220 - 240 LF / Gallon 6" = 165 - 180 LF / Gallon Approximate Cartridge Application 2 1⁄2" = 70 LF / Cartridge 4" = 50 LF / Cartridge 6" = 30 LF / Cartridge Thank you, The Koffler Team

Can i use the wall base adhesive on metal surface? Thanks

Hi Patti, Thank you for your question. Unfortunately, the product will not work on metal, it works on most pours surfaces. Thank you, The Koffler Team

Does the Wall base adhesive adhere to paint, sheetrock, fiber glass, plaster and tile? any other specific directions or materials need to be used for application? Thanks Neha

Hi Neha, Thank you for your question. Here are the approved surfaces for our Wall Base Adhesive. Gypsum wallboard with paper intact • Water-based paint residue over gypsum wallboard • Gypsum or cement-based wall-patching compounds that are hard, durable, well-bonded and fully cured • Exterior-grade plywood, Group 1, CC type • Fully cured masonry and concrete walls Thank You, The Koffler Team

• 

• An acrylic-based wall base adhesive for the interior installation of vinyl, rubber and carpet wall base over approved surfaces.

vinyl base cove adhesive

Written by: - James 11/21/2019

5 / 5 stars

Good goo! Spreads evenly, cleans up with soap and water.
------------------------------------------------------------------------------

Hi James,

Thanks again for the feedback. Haha your right, it is really good goo!

Thank you,


The koffler Team

Good adhesive

Written by: - Paul 8/30/2019

5 / 5 stars

Adhesive worked well and was easy to apply.
------------------------------------------------------------------------------

Hi Paul,

Thank you for your review. We appreciate your feedback and glad you were happy with your purchase.


Thank you,

The Koffler Team

Dependable and reliable product

Written by: - Pat Vacc 8/29/2018

5 / 5 stars

As usual Koffler carries quality products. This item is quality and performed as expected.

Great Product

Written by: - Bob 8/29/2017

5 / 5 stars

Definately the way to go. No mess, multi port nozzle makes applying adhesive very easy and fast!

tacky

Written by: - browns 8/29/2017

5 / 5 stars

nice glue, very tacky, holds base very secure making job
easier. you wont find this in big box stores.

COVE BASE ADHESIVE

Written by: - PMC 10/11/2016

5 / 5 stars

GREAT PRODUCT..........with the multi bead nozzle it spread easily and the oversized tube for a bigger caulking gun covered many linear feet before needing replacing. It was instantly tacky and when you rolled over the vinyl it spread perfectly.

Product fine, shipping can improve

Written by: - cwinco 12/25/2015

3 / 5 stars

Received the product with the tip pushed to the side, braking the seal to the tube. This made it impossible to use the application tip, had to apply it with putty knife. Hope the packaging includes something to protect the tip next time. Product worked fine after application.

Works well!

Written by: - Georgia DIYER 6/12/2014

5 / 5 stars

We used this adhesive for the Pinnacle Wall Base. It holds really well. Was easy to apply using the 6" spout. Allows about 15 minutes to adjust the base before it starts to dry.
Holds very well. Note--We bought the 29 oz cartridge which covered about 30 feet of 5" wall base. (5 lines of adhesive) Also you will need the large commercial size caulk gun.

8 Reviews

Page :    1 of 1