|Print /Email Page|
Roppe Rubber Stair Treads | Non Slip Safety Rib - #A60513
- Sizes and Prices
- Related Products(4)
Rubber stair treads designed for interior installations including panfilled concrete and wood steps. Featuring a horizontal rib pattern.
- Can easily be cut to exact size using a utility knife and straight edge
- 12-1/4" deep
- 1/8" thick at front tapering to.080"
- Square nose; 1-9/16" long, 1/8" thick
- Curved nose; 1-3/8" long, 9/64" thick
- 70 colors available in solid or marbleized
- Cove riser available for face of stair. 7" high. Creates a "finished" look for your staircase.
- Resistant to abrasion, chipping, cracking, cigarette burns
- PVC Free and fully conforms to ASTM F-2169, Type TS
- Approximate weight: 1.25 lbs per linear foot
For light to medium duty applications. Indoor Use Only
- Recommended Rubber Stair Tread Adhesive A401
Do you have any questions about this product? Call (888)355-6287, or email us.Questions others have asked:
Greetings. Could I use these with a double sided tape made specifically for rubber or vinyl stair tread covers (Polyken 105C-P)? These will be installed on finished oak stairs. Thank you.
Hi Martha, Thank you for your question. If the tape is specifically designed for rubber stair treads, then yes that should work. Thank you, The Koffler Team
Can they be used outdoors on porch steps?
Hi David, Thank you for your question. We would not recommend outdoor use if the steps are exposed to extreme heat or cold. Here is a link to the ideal rubber stair tread for outdoor use, https://kofflersales.com/p/stair-treads-outdoor-use.asp Thank you, Ron
I have a question. Testing email
Hi Dimitrios, Thank you for your question. The Koffler Team
Do you have any treads with a rubber edge and short pile carpet in the step area? I am doing the interior stairs leading up from the basement and I do not want them to have a "commercial" look.
Hi Anthony, Thank you for your question. Unfortunately, we have never seen a product similar to what you are looking for. Here is a stair tread that is a little more on the decorative side, https://kofflersales.com/p/stair-tread-mats.asp?cid=50 Thank you, The Koffler Team
how do you install these, glue or peel and stick or ?
Hi Pam, Thank you for you question. These stair treads are installed with a special adhesive. Here is a link to that product, http://kofflersales.com/p/stair-tread-latex-adhesive.asp Thank you, The Koffler Team
What material can I use for my landings so they would match the color and thinness off these stair treads?
Hi John, Thank you for your question. Here is a link to our recommendations for landing tiles. http://kofflersales.com/p/roppe-dimensions-and-raised-tile-designs.asp?cid=2620 Thank you, The Koffler Team
Will this product work when applying your rubber treads to metal interior stairs? Rubber Stair Tread Latex Adhesive - #A401
Hi Lawrence, Thank you for your question. Yes, these treads can be installed over Steel. Please see installation instructions located under the "Specifications" tab on this product page. Thank you, The Koffler Team
Do you have color samples available for this product? Thanks
Hi Chris, Thank you for your question. Yes, we have free samples. Please e-mail your request along with your address to, email@example.com Thank you, The Koffler Team
Where are these stair treads made?
Hi Debbie, Thank you for your question. These products are made in Ohio. Thank you, The Koffler Team
How fast can these ship? There is no option for shipping at checkout. Thanks
Hi Alix, Thank you or your question. Depending on color, size, quantity and nosing. Please feel free to give us a call (888-355-6287) or send an e-mail to firstname.lastname@example.org. Thank you, The Koffler Team
The russet colored stair tread #181 is not marked with a 'v' for indoor use. I wish to use it in an outdoor temperate climate (non-freezing). Do you recommend its use?
Hi Charles, Thank you for your question. Unfortunately, the V doesn't indicate outdoor use. The only rubber stair tread approved for outdoor use is a product specially made for us which is A60512. Please copy and paste this link to visit this product, http://kofflersales.com/p/stair-treads-outdoor-use.asp?cid=50 Thank you, The Koffler Team
Can this stair tread be installed over OSB treads? Some of the OSB treads don't go all the way to the trim work, there is a small gap along the side. Will that be a problem? These are steps going to the basement that need to look good, but I want to avoid carpeting again.
Hi Sally, Thank you for your question. Yes, these can be installed over OSB treads. It would be important to fill the small gap before installing the Rubber Treads. Thank you, The Koffler Team
how do you secure them to the steps. I have 5 wooden steps that need covered in the garage, that lead into the family room entrance. Do you nail them or glue.
Hi Mike, Thank your for your question. The recommended method for installation is adhesive, which is located under the "Related Items" tab. Or, you copy and paste this link, http://kofflersales.com/p/stair-tread-latex-adhesive.asp Also, there are installation instructions listed under the "Specifications" tab. Thank you, The Koffler Team
what is the "v" symbol near some of the colors? How do I determine what a marbled color will look like?
Hi Debbie, Thank you for your question. The "V" symbol is for internal use. Under the colors tab is an image on the right showing what the marbleized style looks like, which is available in all standard colors shown. If you would like an exact sample of the marbleized color you are thinking about, please e-mail email@example.com Thank you, The Koffler Team
Is there a matching riser material to match the Roppe A60513 treads?
Hi Michael, Thank you for your question. Yes, the risers are located on this page at the bottom below the stair tread sizes. Thank you, The Koffler Team
My question concerns the size. Is the smaller number the width of the flat part of the stair tread, or is it the flat part plus the nose?
Hi P. Dawson, Thank you for your questions. The small number (i.e. 12-1/2") is the depth of the stair tread. I think your saying the same thing which is the flat part. It does not include the nose. Thank you, The Koffler Team
Is that $18.00 each? I need something cheap for basement stairs
Hi Mike, Yes, that's $18.90 each for the 36" Rubber Safety Rib. However, you may want to look at our Vinyl Stair Treads, which are less expensive and should be fine for basement steps. Here is the link, http://kofflersales.com/vinyl-stair-treads.asp Thank you, The Koffler Team
1. can it be easily cut to fit a 29.5" long tread? 2. what is the best adhesive?
Hi. P. Toner, Thank you for your question. Yes this product can easily be cut with a utility knife. Thank you, The Koffler Team
Roppe Rubber Stair Treads | Non Slip Safety Rib Roppe https://kofflersales.comp/stair-treads-safety-rib-by-roppe.asp?cid=65 New4.9 60
Safety Rib Design Rubber Stair Treads by Roppe designed for interior installations including pan filled concrete, wood, and metal steps. Featuring a horizontal rib pattern in 70 colors. Comes in Non Slip Molded Rubber Square or Curved Nose.
- Corner Guards Wall Protectors
- Wall Guards and Wall Protection
- Wall Guard Bumpers by McCue
- Chair Rail Ideas
- Plastic Handrails - Interior
- Diamond Plate & Smooth Metal Trim | Sheets
- Wall Planks - peel and stick
- Grab Bars | Straight and Angled | Floor to Wall
- Corner Guards Wall Protection by InPro
- Door Stops
- Wall Protection Sheets and Planks
- Wall Base | Vinyl | Rubber | Metal
- Floor Mounted Bumper Guards
- Koffler Sales, LLC
- © Copyright 2020. All rights reserved. 1-888-355-MATS
- Privacy Statement