|Print /Email Page|
Vinyl Stair Tread | Nosing | Corner Guard | Edging Adhesive - #A408
- Sizes and Prices
- Related Products(4)
A water-based contact adhesive for the interior installation of vinyl stair treads over approved surfaces. trowelable, water base evaporation cure. Use over suspended wood, concrete or metal floors but not in areas where excessive moisture exists. This adhesive has excellent initial grab and long term aged bond strength. (Approx. 75 sq. ft. per gallon)
- Brand: Koffler Adhesive
For Corner Guards:
For Vinyl Stair Treads and Nosing
Want more information?
Do you have any questions about this product? Call (888)355-6287, or email us.Questions others have asked:
Would this adhesive work to adhere vinyl stair noses (A783 or A799) or vinyl stair treads (A7148) to ceramic tile stairs? Do I need to sand the tile surface first to give it more surface area to grip?
Hi Elisabeth, Thank you for your question. Yes, this is the right adhesive. However, there are few things to be aware of during the installation process. Please see the installation instructions listed on this Vinyl Stair Tread in the below link. Then go to the "Specifications" tab in the bottom right side. https://kofflersales.com/p/tread-treads-light-gauge.asp?cid=66 Thank you, The Koffler Team
I am getting ready to purchase 16 12 1/4 x 36" indoor stair treads. How much adhesive should I buy?
Hi Chris, Thank you for your question. One gallon will cover the entire job. Thank you, The Koffler Team
We are going to purchase 13-15 Johnsonite corner guards 1.5in x 1.5in x 4 ft. How much adhesive do we need?
Hi Valerie, Thank you for your question. Here is the chart for the amount of adhesive you will need. 1 lin. ft. for 3/4' x 3/4' Corner Guards = .13 sq. ft. of Adhesive 1 lin. ft. for 1-1/4' x 1-1/4' Corner Guards = .21 sq. ft. of Adhesive 1 lin. ft. for 1-1/2' x 1-1/2' Corner Guards = .25 sq. ft. of Adhesive 1 lin. ft. for 2-3/8" x 2-3/8" Corner Guards = .40 sq. ft. of Adhesive Thank you, The Koffler Team
I would like to buy two A7141 Robbe Rib Vinyl Stair Treads (12 1/2 x 42) but it doesn't sound like this adhesive would be appropriate for my application. I want to put the treads onto 2 cement steps leading into my house. So this would be an outdoor location. Is there an alternative to this adhesive that seems to be for use in non-moisture setting?
Hi Donna, Thank you for your question. The only rubber stair tread approved for outdoor use is our A60512. Please copy and paste this link to view. The adhesive for this product is also located on the page in the tab called, "Recommended Products", http://kofflersales.com/p/stair-treads-outdoor-use.asp?cid=50 Thank you, The Koffler Team
Can A408 tread adhesive be used on rubber treads? I am about to buy the A60510 rubber treads, but only need 4. I was looking for something smaller than a whole gallon of the adhesive - which appears to be all the A401 rubber adhesive comes in.
Hi Jonathan, Thank you for your question. A401 is the right adhesive for A60510. A408 is for Vinyl products. Thank you, The Koffler Team
The floor accessory adhesive says to put it on approved surfaces. Nowhere does it say what those are. We want to put it on stairs but the stairs are painted. Will it work on the paint or does it need to be bare wood? Thanks.
HI Linda, Thank you for questions. Yes, painted stairs are OK, just so there's no moisture on them. Thank you, The Koffler Team
I have installed peel and stick vinyl tiles on my stairs leading to my garage (indoors). I am ordering stair nosing (product A799 and want to find out if the achesive (A408) can be used to glue the nosing to the vinyl tiles (description says for use on wood and concrete). Please advise.
Hi Susie, Thank you for your question. We wouldn't recommend Vinyl nosing to be glued to the Vinyl tiles, as they may pull the tiles up over time. However, we would recommend that you consider pulling up the tiles and lay complete new stair treads. Here is a link to our Vinyl treads, please copy and past this link. http://kofflersales.com/vinyl-stair-treads.asp Thank you, The Koffler Team
|Product color is as described under 'Sizes and Prices'|
Water-based contact adhesive for the interior installation of vinyl stair treads over approved surfaces. Trowelable, water base evaporation cure. This adhesive has excellent initial grab and long term aged bond strength.
- Corner Guards Wall Protectors
- Wall Guards and Wall Protection
- Wall Guard Bumpers by McCue
- Chair Rail Ideas
- Plastic Handrails - Interior
- Diamond Plate & Smooth Metal Trim | Sheets
- Wall Planks - peel and stick
- Grab Bars | Straight and Angled | Floor to Wall
- Corner Guards Wall Protection by InPro
- Door Stops
- Wall Protection Sheets and Planks
- Wall Base | Vinyl | Rubber | Metal
- Floor Mounted Bumper Guards