|Print /Email Page|
Carpet Edging | Metal Trim - #A614
- Sizes and Prices
- Related Products(7)
A professional finish to any carpet edge, while also protecting it from fraying. Perfect for commercial or residential applications where strong protection is important
- 5 Profiles
- 6 ft. Rough cut Aluminum
- "Flex"- Contour (Flex) style has an extra cut that allows trim to be bent and shaped around curved floor applications, allowing a 3ft. radius bend.
- Comes with pre-drilled holes but no screws
Residential or commercial carpet applications.
Do you have any questions about this product? Call (888)355-6287, or email us.Questions others have asked:
How do you remove the medal edging #A614 from the carpet without tearing the carpet? Thanks much
Hi Lynn, Thank you for your question. You have to work very carefully to stretch the carpeting little by little to get over the hooks. It might work with your hands but you may need professional assistance with a carpet stretcher. Then remove the screws from the base. Thank you, The Koffler Team
I'm new at this. Have several thresholds in a new remodel. Carpet to carpet on a cement subfloor, carpet to tile on cement subfloor. Carpet to tile on a wood subfloor. Decor is modern. What should I use? Thank you
Hi Carmen, Thank your for your question. You have several choices. Please copy and paste this link to view the various options. When choosing please make sure you know the thicknesses of all the surface. Please start by looking at the first 4 products on this page, https://kofflersales.com/floor-edging.asp Also, please don't hesitate to call one of our product specialists anytime between 9:00am-4:00pm. Thank you, The Koffler Team
I have cut out an area of carpet at my door entrance and have put vinyl down. It's 26x30x26. Will this product bend at the corners?
Hi Rose, Thank you for your question. Unfortunately, this product will not bend at the corners. Thank you, The Koffler Team
I need a trim for the carpet next to my kitchen vinyl floor. This looks like exactly what I need. How is this installed?
Hi Vickie, Thank you for your question. It is installed using screws. However this product comes with holes drilled but no screws. Thank you, The Koffler Team
We have this trim installed in our home when it was built in 1999. Carpet Edging | Metal Trim - #A614 This piece covers a transition from a carpeted hallway to a linoleum bathroom floor. We need to replace the bathroom flooring with new Lino and want to know how that can be done without messing up the carpet attached to the other side? Is there a way to replace the Lino without completely removing the strip? Thanks for any help!!
Hi Eve, Thank you for your question. It really depends on how much space is between the edging and Lino. If there is enough space to use a tool to pull up the Lino, then it can be done without removing the strip. Thank you, The Koffler Team
I have a semicurcular area that might need a carpet-to- tile transition piece, possible a 6' dieamet half circle at an entrance. I noticed your Flex #14269 product. How tight of an inside radius can it manage ? Thanks
Hi Michael, "Correction" Flex #14269 has a maximum radius bend of 6ft. for a 12ft. section. So it can accommodate your entrance. If you are interested please make a note in the Special Instructions area that you would like (1) 12' piece. Or feel free to call us with your order. Thank you, The Koffler Team
I have just put in vinyl flooring next to my carpet which is 132 inches long and a drop from carpet to floor about an inch.Any suggestions or product you sell that may accommodate this. Thank You
Hi Wiblet1, Thank you for your question. Please take a look at this page of Rubber and Vinyl Edging and Reducers, http://kofflersales.com/floor-edging.asp Thank you, The Koffler Team
I have a 5' by 8 ' rug that my new puppy loves to chew on…what kind of guard can you suggest to protect it? It is basically the corners.
Hi Terry, Thank you for your question. This product is used to protect carpet edging in threshold area. We do not have a product that can protect the comers of area rugs. Thank You, The Koffler Team
Hello Is this flexible? I need something that allows a slight bend/curve. THX William
Hi William, Thank you for your question. There is one profile (#14269) that will allow a Contour (Flex) style, it has an extra cut that allows trim to be bent and shaped around curved floor applications. Thank you, The Koffler Team
Looking for something similar... who manufactures this? may need to go custom.
Hi Jessica, Thank you for your questions. We would be more then happy to search out your requirements. Would it be possible for you to e-mail an image to firstname.lastname@example.org? Thank you, Your Koffler Team
- Corner Guards Wall Protectors
- Wall Guards and Wall Protection
- Wall Guard Bumpers by McCue
- Chair Rail Ideas
- Plastic Handrails - Interior
- Diamond Plate & Smooth Metal Trim | Sheets
- Wall Planks - peel and stick
- Grab Bars | Straight and Angled | Floor to Wall
- Corner Guards Wall Protection by InPro
- Door Stops
- Wall Protection Sheets and Planks
- Wall Base | Vinyl | Rubber | Metal
- Floor Mounted Bumper Guards
- Koffler Sales, LLC
- © Copyright 2020. All rights reserved. 1-888-355-MATS
- Privacy Statement