Do you have any questions about this product? Call (888)355-6287, or email us.
Questions others have asked:
I'm interested in putting up a "Grab Bar" - in a very narrow space. Your 4" x 8' (Med) appears to be a product which will do it. It's going to be used primarily as a guide along a wall with no other "touchable" surfaces. I needs to be mounted approximately 1" from the wall (to get my fingers behind it. It also has to have enough strength to provide support for a 200 lb. adult male. I have some questions: 1. Can it be mounted about 1" from wall behind it? (I'm planning on attaching it with wood crews, into the studs.) 2. Can you recommend a spacer between the back of the Wall Guard and the wall behind it to fit fingers into (3/4" - 1" ?).
I know this is not designed for what it is designed for, but it's the only product I've been able to locate on the internet. (I'd appreciate your recommendations for a substitute or your comments if you believe it won't work.)
If you believe a phone call may work better, let me know and I'll call you. Anticipating your assistance.
Hi Steve,
Thank you for your question. Unfortunately like you said, this product is not designed for your type of application. Please take a look at these product links. The first 2 products on this page, https://kofflersales.com/handrails.asp Or any of these, https://kofflersales.com/grab-bars.asp
Thank you,
The Koffler Team
I was not able to fine inside corners for your Wall Guard with Aluminum Retainer - #A825. Do you have them available?
Hi Ashanti,
Thank you for your question. Unfortunately, this manufacturer doesn't make inside corners for this product. However, our Inpro line does provide inside corners. Please copy and past these links to see those lines, http://kofflersales.com/p/inpro-standard-wall-guards.asp?cid=2591 http://kofflersales.com/p/inpro-designer-wall-guards.asp?cid=2591
Thank you,
The Koffler Team
Hello - After receiving our sample & taking measurements, we were wondering about the size of the end caps - if it is a rounded end cap, how much space should be left between the end of the rail & the corner and/or end of wall for the end cap? The website tells you the width, but not much else. Or, is the end cap flat & snap into the rail? Please advise so we can determine lengths & qty needed. Thank you.
Hi Shirley,
Thank you very much for your question. Please go to the specifications tab on this page and look on the right side. Each of the products have additional information located under the area titled, "Want More Information"
Thank you,
The Koffler Team
Hello-We are looking for wall guard to protect the walls in new conf area from chairs/tables, etc. Could you send us sample of A825 6" Textured Wall Guard in Brown color? Pls send to WCSI, Attn: Kevin, 770 E. Pgh. St., Greensburg, PA 15601. Thank you.
Hi Shirley,
Thank you for your question. Yes, we will have sample sent to you today.
Thank you,
The Koffler Team
would you send me sample of Wall Guard 1 1/2 x 1 1/2 x 144" Simplicity I
Hi Carlos,
Thank you for your question. we will send you a sample tomorrow.
Thank You,
The Koffler Team