Johnsonite Vinyl T-Molding - #A516

Do you have any questions about this product? Call (888)355-6287, or email us.

Can I get a sample of the drywall-xx-w, need a transition from artificial turf to gym flooring, would like it in black if it works. Thanks Dave Castro 8472174418

Hi David, Thank you for your question. We will forward this to our sample department. Thank you, The Koffler Team

Looking to fill a 16' area from carpet to linoleum and like the 3" because the carpet has worn were it meets and might need the 3" to cover the worn areas. Do you have a one piece top for that. I am ok with the bottom piece being 2 pieces. Thanks

Hi Chris, Thank you for your questions. Unfortunately, we do not have a one pice top that covers 16'. Thank you, The Koffler Team

Hello, Looking to receive a sample of the Johnsonite Vinyl T-Molding - A#516 in color Sisal (#130). Transitioning from a wood floor laminate into a vinyl floor and need it to be ADA friendly. This appears to be a product that may fit the bill. Kindly advise how we can proceed. Thank you

Hi Domna, Thank you or your question. We would love to send you a free sample. Please e-mail your request along with your address to, samples@kofflersales.com Thank you, The Koffler Team

2 Part question: We cannot remember if we have done business with your company. Major Hospital, Indiana. Also would it be possible to get color samples of the CD-XX-C? Like (76- Cinnamon or 63-Burnt Umber

Hi Terry, Thank you for your question. Yes, we do provide free samples. Please e-mail your request along with your address to samples@kofflersales.com. We do show that your organization has purchased from us in the past. Here is preliminary information. 12/5/2018 12:09:20 PM CT JEFF SLINKER MAJOR HOSPITAL JSLINKER @MAJORHOSPITAL.ORG $122.21 Sales Order 240085 View E- 208361 10/9/2018 6:32:55 AM CT BRANDON SCHULTZ MAJOR HOSPITAL BSCHULTZ @MAJORHOSPITAL.ORG $97.88 Sales Order 236281 View E- 207385 9/24/2018 8:14:54 AM CT BRANDON SCHULTZ MAJOR HOSPITAL BSCHULTZ @MAJORHOSPITAL.ORG $129.53 Sales Order 235385 View E- 70276 12/8/2014 10:37:16 AM CT WILLIAM VANEST MAJOR HOSPITAL WVANEST @MAJORHOSPITAL.ORG $46.73 Sales Order 143867 View Thank you, The Koffler Team

Hi, I would like to make a 45 degree turn. Do you have such an adapter?

Hi Frank, Thank you for your question. As far as we know there is know 45 degree adapter. However, you can mitre a 45 degree angle to accomplish this. Thank you, The Koffler Team

What do you recommend for transition between 1/2" tile (already installed) to 3/8" laminate (going to install). Longest run is 12'. Would prefer to not have seams. Can you provide samples?

Hi Lucinda, Thank you for your question. If you can lay the laminate over the track base, then you can use this product and profile CE-XX-C. If not please look at this product (A528) http://kofflersales.com/p/roppe-rubber-reducers.asp?cid=2584 Thank you, The Koffler Team

going from 3/4" carpet to 3/4" tile will anything work

Hi Ed, Thank you for your question. Unfortunately, we have nothing that is 3/4" on both sides. The closest is our 1/2". Thank you, The Koffler Team

We just had thick carpet installed that abuts ceramic tile (straight edges). I'd like to add a transition molding that protects the carpet edge from fraying and getting dirty when cleaning the tile. I think I see how to measure the metal track, but not sure how to pull up edge of carpet and tuck it back in tightly. Any suggestions?

Hi Denise, Thank you for your question. You can attempt to pull the carpet up gently without damaging the carpet. Please refer to the installation instructions located on this product page under the tab, "Specifications". Also, please take a look at this product as well (A518) which doesn't need a track. http://kofflersales.com/p/wheeled-traffic-transitions.asp?cid=2584 Thank you, The Koffler Team

Is it possible to use this product for a transition with a radius less than 6'? And how have you determined what the minimum radius is (e.g. breakage at 6'?)? Also, let me know if/how I can send you a photo of the potential transition so that you can recommend the best color(s).

Hi Josiah, Thank you for your question. The radius requirement is recommended by Johnsonite and that's our guidelines. Unfortunately, we have never tested any smaller of a radius. Thank you, The Koffler Team

How wide is the riser on the metal and plastic track used to snap in the moulding? 0.5 in, 0.25 in, other? Thx Dave

Thank you for your question. If you scroll through the images in the right-hand image box, you can see the cross section for each one shown. The metal is 21/64" and the plastic is 11/32". If you need anything else, please let us know.

I have recently had a flooring company install luxury plank vinyl flooring in my kitchen. There is a height difference at the transition to carpet (my family room). They have installed a wood transition piece that we keep tripping over or stubbing our toes because one side has an L edge. This product seems as tho it would be a better option. Please advise. Thank you.

Hi Rebecca, Thank you for your question. Yes, this product is certainly an option and used for that application by many of our customers. There are also other options, please feel free to copy and past this link to our category page. http://kofflersales.com/floor-edging.asp Thank you, The Koffler Team

What type of adhesive should be used to secure a transition metal track to a concrete floor?

Hi Michael, Thank you for your question. You can use our product A408. Please copy and paste this link to view our recommended adhesive, http://kofflersales.com/p/stair-treads-and-corner-guard-adhesive.asp thank you, The Koffler Team

We have track base already installed but would like to replace the existing vinyl adapter. How do I measure the existing track base "rail" to be sure that I order the correct adapter? Thank you.

Hi Lynn, Thank you for your question. It would be important to measure the depth of the current track, and the thickness of the carpet or floor on each side. Then match the measurements up with one of the profiles. Thank you, The Koffler Team

I have an approx. 3/3 square entry way. Do you cut this product for the corners, or can it be bought with corners?

Hi Tom, Thank you for your question. The manufacturer doesn't make corners, so the best way is to Mitre them. Thank you, The Koffler Team

How do you suggest I cut the Vinyl T-molding to size? Can I use a miter saw? or should I use a utility knife. Thanks, Mark

Hi Mark, Thank you for your question. We would recommend cutting it with a utility knife. Thank you, The Koffler Team

Will you cut to order? I need 32 1/4 and 31 7/8...Track and T-molding.

Hi Calvin, Thank you for your question. Unfortunately, we do not custom cut this product. However, you can cut it yourself with an electric saw or handsaw that has a aluminum cutting blade. Thank you, The Koffler Team

I have an area in my house that is a transition from tile to tile that has a slight height discrepancy. I am not sure what to order. Do you have suggestions for what to do there? My phone number is 731-695-1980 or email is listed above so whatever is the easiest mode of contact for you. Thanks so much!

Hi Kelly, Thank you very much for the question. We will have someone call you soon. Thank you, The Koffler Team

Can the CD-XX-A be used outdoor, looking for a t trim strip to go between foam panels on a foundation. How wide id the part that goes down? thanks

Hi Gene, Thank you for your question. Unfortunately, this product is not recommended for outdoor use. Thank you, The Koffler Team

Hello, I'm wondering which T-molding product I should get specifically if I have rubber flooring on one side that is 3/8 thick and carpet on the other side that is 5/8 to 3/4 thick. Thanks, Rus

Hi Rus, Thank you for your question. It looks like profile CC-XX-C would be the profile that would fit your application best. Also, please look at Roppe's product and profile 182, Here is the link, http://kofflersales.com/p/roppe-vinyl-reducers.asp?cid=2623 Thank you, The Koffler Team

Can this product be used to join vinyl laminate with vinyl laminate? Also, can we get color samples to match the floor as close as possible?

Hi Melissa, Thank you for your question. Yes, you can join vinyl laminate with vinyl laminate. For sure, we can send you samples. Our sample department will contact you today to get your information. Thank you, The Koffler Team

Is the vinyl T-Moulding paintable?

Hi Frank, Thank you for your question. Unfortunately, the T-Moulding is not paintable. Thank you, The Koffler Team

Can this system be reversed, where the track is embedded in thinset beneath the tile, i.e.,tile is meeting carpet or tile is simply being terminated at a doorway?

Hi Lou, Thank you for your question. We do not recommend reversing the process. It could possible lead to tile cracking down the road. Thank you, The Koffler Team.

Is this rubber or flexible

Hi Dave, Than you for your question. This product is PVC Vinyl. It not too flexible. If your looking for a molding that is flexible, please view this product, specifically the Countor Edge (last 6 line items). http://kofflersales.com/p/slim-line-transitions.asp?cid=2605 You can shape this to make gradual turns. Thank you, the Koffler Team

• 

• Johnsonite® Carpet Snap-In "T" Molding and Track Base Transition Molding are made from high quality PVC, are extremely durable, and create the perfect, professional flooring finish for joining carpet to various flooring materials.

Sort By: Newest First Oldest FirstHighest RatedLowest Rated
32 Reviews		Page :    1 of 4    1234

Great look for sure .

Written by: - Lakelover 11/5/2019

5 / 5 stars

Vinyl on vinyl T mouldings gave us a great finished floor.
Only high shipping shipping cost was the only down side.
--------------------------------------------------------------------------------

Hi Lakelover,

Thank you for your review. We very much appreciate the kind remarks concerning our Johnsonite T-Molding. Unfortunately, the parcel companies consider 12ft. long packages to be oversized, and therefore they have implemented a surcharge.

Your past, present, and future business is greatly appreciated.

Than you,

The Koffler Team
.

Highly recommended.

Written by: - Printerman 6/5/2019

5 / 5 stars

Aluminum track and vinyl T-Molding worked perfectly. Easy to install and very happy with results. Customer service provided samples which were very helpful. Highly recommended.
---------------------------------------------------------------------------------

Hi Printerman,

Thank you for your review. We really appreciate the feedback about the ease of installation. We strive very hard to provide the highest level of customer service and it's good to know it's paying off.

Your past, present and future business is greatly appreciated.

The Koffler Team

Just right for my floors

Written by: - Rayjoyce7 12/5/2018

5 / 5 stars

I needed a T-molding to join two floors together in my basement. One is just a little bit higher than the other so the molding had to accommodate that. Also, the gap between the two floors is larger than most T-moldings. This Johnsonite Vinyl T-Molding did the job just perfectly. Because it is vinyl, it was flexible enough to accommodate a slight difference in height. Also, it was able to bridge the larger than normal gap between the two floors. It was easy to install as well. I highly recommend this!
--------------------------------------------------------

Hi Rayjoyce7,

Thank you for your very thorough review, and the kind words about the ease of installation. Your personal experience and recommendation is greatly appreciated.

Thank you,


The Koffler Team

Great product and price!

Written by: - Dylan 11/27/2018

4 / 5 stars

I have used a lot of T-moldings over the years and this product met my expectations and fit the application really well. Other than, the eight foot piece of vinyl being folded in half for shipping purposes (it creased a little too much so the middle section was difficult to get the crease to settle back down and look flat), I liked the product and would order again. Thanks, Koffler!
---------------------------------------------------------------

Hi Dylan,

Thank you for your review and the the nice feedback about our product. We are sorry about the crease, however by folding it we have saved our customers a substantial amount of FeDEx oversize shipping charges. We do recognize the inconvenience of a crease and can ship it flat next time. Please request flat shipping in the special instructions of your next order. Also, customers say they have used a household hair dryer and the crease disappears pretty quickly.

Thank you,


The Koffler Team

Great Find

Written by: - skeeter 9/5/2018

5 / 5 stars

We were looking for molding a little larger than what your normal stores carry. We found it at KOFFLER....

-----------------------------------------

Hi Skeeter,

Thank you for your review. We have over 7200 different products, sizes and colors. We're so glad we had something to fit perfectly with your needs.

Thank you,


The Koffle Team

Solved my problem easily!!

Written by: - Sipdog 7/16/2018

5 / 5 stars

Had a horrible installation of commercial carpet where seams were coming apart so we covered the seams and solved the problem color choices were key!!

-----------------------------
Hi Sipdog,

Thank you for your review. We are very please our T-Molding was a great solution for your horrible carpet installation. If you have any further questions always feel free to give us a call.

Thank you,


The Koffler Team

Solved my problem

Written by: - Critical homeowner 7/8/2018

5 / 5 stars

We had Berber carpet next to tile. There was a chip in the tile and the carpet had run. This product secured the carpet and covered the chip in the tile edge. The end result looks good. We have only installed it recently so I cannot tell how it will holdup over time but I am pleased so far.

--------------------------------

Hi Critical Homeowner,

Thank you for your review. We are very pleased that our product solved a critical issue with your tile / carpet transition. Always feel free to contact us if the need should arise.

Thank you,

The Koffler Team

Awesome product will but again!

Written by: - Nick 5/10/2018

5 / 5 stars

This was exactly what I needed, had a hard time finding anything locally to meet my need, took a chance and found the perfect product. Easy to install and looks awesome, love all the color options. I will be ordering again for my next project

Perfect

Written by: - QI 3/3/2018

5 / 5 stars

Just what we needed. Going to order again.

perfect solution

Written by: - dennis 3/2/2018

5 / 5 stars

Replace headliner trim in my CJ7 perfect fit looks great

32 Reviews

Page :    1 of 4