Print /Email Page | |
Rubber Stair Nosing by Roppe - #A606 |
-
- Description
- Sizes and Prices
- Colors
- Specifications
- Reviews(37)
- FAQ
- Related Products(3)
Rubber Stair Nosing that brings a professional finish to any hard surface such as tile, wood, or stone. Also provides stairs protection from slips and falls. Perfect for commercial or residential indoor applications where nonslip protection is important.
The rubber stair nosing comes in 6 designs and 30 colors.
Residential or commercial indoor applications where stone, tile, or wood steps require a professional safety stair nosing finish. We recommended Epoxy Flooring Adhesive #A402.
Contains 10% natural rubber, a renewable resource which may contribute to the LEED Green Building Certification System, and meets CHPS criteria. Ribbed designed for added traction and non-slip grip.Radius
- Profiles #1-#6, is 11 ft. radius
- Profiles #7-18, is 12 ft. radius
Want more information?
See the following Product Information Sheet(s):
Do you have any questions about this product? Call (888)355-6287, or email us.
Questions others have asked:Rubber Stair Nosing by Roppe - #A606 Can this product be used as the nosing on a large radius curved step?
Hi Ron, Thank you for your question. It really depends on the profile. Hee is the radius by profile. Profiles #1-#6, is 11 ft. radius and profiles #7-18, is a 12 ft. radius. Thank you, The Koffler Team
Our floor guy recommended rubber stair nosing to protect outdoor porch edges (above concrete step) from wear on a front porch (composite) and back porch (mahogany). But I see that your rubber product is not recommended for outdoor use. My question, if you are able to answer it, is whether the reason for this is specific to your product or would apply to rubber stair nosings from any manufacturer (because others don't specify this limitation).
HI Don, Thank you for your question. Yes, it is made for interior use, however many of our customers have used it outdoors successfully. Over time depending on weather you may experience cracking or fading from the elemnets. Thank you, The Kofferl Sales
You mentioned in one of your answers that style A606 could be used on carpet. How do you attach it? I only see references to adhesives.
Hi Jane, Thank you for your question. You will need to choose one of the profiles that is meant for carpet, which contains a single flange (profiles 7-18). Then you would use a recommended epoxy adhesive. Here is a link to our epoxy adhesive. Thank you, The Koffler Team
I am looking for something similar to your rubber stair nosing for outdoor (Sheltered) use.
Hi Tim, Thank you for your question. Here are links to our outdoor stair nosing products. https://kofflersales.com/metal-stair-treads.asp, https://kofflersales.com/stairtreads-fiberglass-plastic.asp Thank you, The Koffler Team
Hi, I have a condo with 16 stairs leading to the main living area. I removed the carpet and painted the steps, but the nosing needs reinforcement for durability. I'm thinking of the design A606 #6 because I just want to cover the nosing part, not the main step part. Will this work? The material is particle board and the existing stair nosing is rounded and about 1.25" high. What would you recommend?
Hi Annettte, Thank you of your question. The nosing will adhere to particle board no problem as long as the adhesive is for rubber stair nosing. It's hard to tell you 100% if this will work or not as we are not there to see the actual project. However, it appears like it will be fine from what you told us. Thank you, The Koffler Team
Hi. i am installing 12x12 slate tiles on landings above and below concrete steps. i am using Roppe rubber stair treads and need a stair nose for the top step. The slate tiles are described as Slate thickness: 0.32"thick with overall thickness: 0.3750002 ''. Which stair nose do you recommend? Thank you
Hi Laura, Thank you for your question. We would recommend profiles 1-6. Selecting one of those is really personal preference. However, make sure you choose the right nose (square nose or round nose). Thank you, The Koffler Team
Do you sell rubber stair nosing longer than 9'? I need one that is 12' in length. Also, do you ship to Canada? Thanks!
Hi Enrique, Thank you for your question. Unfortunately, our rubber stair nosing is only available in 9' lengths. However, our vinyl stair nosing is available in 12' lengths. Here is a link to our vinyl stair nosing. Feel free to copy and paste this link to view this product, http://kofflersales.com/vinyl-stair-nosing.asp Thank you, The Koffler Team
We are installing the Allure floating planks from Home Depot on the stairs of a rental home and need a stair nosing. The stair ends are rounded. What would work the best for this job?
Hi Kimberly, Thank you for your question. It really depends on the thickness of the planks. Please look at all the even number profile images at the top right of this page. The even numbers are the rounded nose. Then take a look at the thickness of the non-nose edge, that should matchup with the thickness of the flooring. Thank you, The Koffler Team
I would like to use stair nosing # M-7 with a combination of 1/4" plywood underlayment and 3/16" tile on the treads. Would the underlayment flush out with the first profile height?
Hi Steve, Thank you for your question. We are not quite sure how to answer your question since it's hard for us to visualize. We feel it's best that we send you a free sample to insure the profile is the right solution. Please e-mail samples@kofflersales.com with your name, address, and profile(s) you are looking. Thank you, The Koffler Team
I'm a little confused about this product coming in 9ft instead of amount of stairs. How do I know the quantity I would need for my staircase? Also, there is a landing that I would like to put a matching cover on. Is that product something you sell as well?
Hi Gretchen, Thank you for your question. To determine the quantity for your stairs, please measure each stair length (left to right) and then divide that by 9ft. to see how many steps each 9ft. piece will yield. Then divide that number by the number of steps. For your landing please refer to any of these Roppe Floor Tiles, http://kofflersales.com/roppe-rubber-floor-tile.asp Thank you, The Koffler Team
Good morning! I have vinyl plank flooring being installed in a stairwell and landing area. First question: how do I get samples so I can match the flooring (it looks like brown/gray barn wood). Second question: which one do you recommend? Thank you very much for your help, have a great day! Lisa M. Culp
Hi Lisa, Thank you for your questions. We do provide free samples. You can e-mail your sample request along with your address to samples@kofflersales.com. The recommendation for a nosing is based on thickness of your tile and if the treads are round nose or square nose. Feel free to call our sample department (888.355.6287) and they can help you choose the right one. Thank you, The Koffler Team
I want to use rubber nosing on my stairs. I will put down porcelain tile on the horizontal surfaces and wood on the vertical surfaces. Both the tile and the wood are 1/4 inch. Which profile should I use?
Hi Gail, Thank you for your question. We would recommend #13 or #14, depending on weather the stairs have a round or square nose. Thank You, The Koffler Team
My front porch has a wood deck and the planks run parallel with traffic with a small 3" plank at the front step. Over time the 3" plank has shown wear and I would like to cover with one of your rubber 4" wide treads. All your comments are for indoor and I want to know if it will be ok for exterior. We live in Charleston , SC so we very seldom see below freezing temps. Also will salt air affect the rubber? Look forward to hearing from y'all.
Hi Bill, Thank you for your question. Unfortunately, this product is not recommended for outdoor use. Please copy and paste these product page links for other recommendation. http://kofflersales.com/p/anti-slip-decking-strips.asp?cid=23 http://kofflersales.com/p/metal-stair-treads-flexmaster.asp?cid=69 http://kofflersales.com/p/stair-treads-and-nosing-fiberglass.asp?cid=49 Thank you, The Koffler Team
I have a tiled entryway with carpeted steps leading to the lower level. I have no nosing on the tiled edge. The carpet is attached to the back side of the steps as well as the tread. I want to cover the tiled edge and the edge of the carpet at the top step. Which product of yours will best suit my situation. Thank you, Bruce
Hi Bruce, Thank you for your question. You can use this product or any of the first 3 products listed on this page-link below. As well as the 2nd product in the second row (A608). Please copy and paste this link, http://kofflersales.com/stair-nosing.asp Thank you, The Koffler Team
I want to install the rubber nosing on my stairs do I need any adhesive other that the nose caulk
Hi Ron, Thank you for your question. Yes, you will need adhesive. Please copy and past this link to view the adhesive.Our product code is A402, http://kofflersales.com/p/stair-tread-epoxy-adhesive.asp Thank you, The Koffler team
We have bare wooden stairs. 1 5/8" thick. Looking for either rubber or vinyl nosing for added safety. What size do you suggest? Thank you Ken Johnson
Hi Ken, Thank you for your question. Choosing a nosing is based on weather the stairs have a round or square nose and your personal preference as to how much tread width you would like. For this product you can choose from profile #1-#6. Number 3 or 4 looks nice. Thank you, The Koffler Team
Hi, i have ordered the rubber square landing tiles for a landing which has seven steps below to basement, also order rubber stair treads for the steps. Do i need a stair nosing on the landing that leads to steps? Or just the landing tile? Thnx.
Hi Deb, Thank you for your question. If you are installing new landing tile that should be sufficient without a nosing. Thank you, The Koffler Team
I am looking for a tread to use on the "step" (4"x18") on tall Adirondack chairs. I am thinking of using the Roppe rubber nosing (profile #2). The chairs will be on a covered porch, so there will be some exposure to the elements, which involves the heat and salt air of coastal Florida but no direct rain. Is this workable? Thanks for your help, Joe
Hi Joe, Thank you for your question. The Roppe Rubber Nosing should work fine as long as it remains under cover. Thank you, The KOffler Team
How is this installed over carpet? With the epoxy adhesive? THanks, Mike
Hi Mike, Thank you for question. Yes, you can use our recommended adhesive located in the related items tab. Also the installation instructions are located in the specification tab. Thank you, The koffler Team
Hi, we have slate stairs going down to the basement with sharp corners. Which of your products would you recommend? Thanks,
Hi Cynthia, Thank your for your question. We would recommend either our A608, A799, or A608. Thank you, The Koffler Team
I am looking for stair nosing that can go around a circular opening so it needs to be flexible. Is this product something I could use?
Hi Amy, Thank you for your question. I would recommend the Roppe Vinyl Nosing. Below is the link to the page. Go to the "Specifications" tab and take a look at the specifications sheets at the bottom right. Each profile can bend to a specific radius, they vary anywhere between a 10-11ft. radius. http://kofflersales.com/p/roppe-vinyl-stair-nosing.asp?cid=59 Thank you, The Kofler Team
In regards to the rubber stair nosing #A606 profile # 5, can I get this custom size to 54"?
Hi Alejandro, Thank you for your question. Unfortunately, this product does not come in custom sizes. However, you can easily cut our 9' piece to any size with a utility knife. Thank you, The Koffler Team
I am wondering whether you could provide size #3 but with 1 and 3/4 inches height? Thanks very much
Hi Sheng, Thank you for your question. Roppe dosn't make that nosing in a 1-3/4" height. However, here is the link to our Johnsonite nosing, and the first size is 1-3/4" http://kofflersales.com/p/stair-nosing-by-johnsonite.asp?cid=59 Thank you, The Koffler Team
Is rubber nosing OK for outdoor use on wooden stairs? I would screw the nosing into the steps.
Hi Jensen, Thank you for your question. No, the rubber nosing is not approved for outdoor use. However, there are 4 products are excellent for outdoor use, the 2nd, 3rd, and 4th products on this page, http://kofflersales.com/metal-nosing.asp. As well as this product, http://kofflersales.com/p/stair-treads-and-nosing-fiberglass.asp?cid=49 Thank you, The Koffler Team
Which rubber or vinyl nosing do you recommend for carpeted stairs to prevent slipping? This is for well-used stairs. Thanks.
Hi Esther, Thank you for your question. I would actually recommend this product, A606 Roppe Rubber Stair Nosing. Rubber will provide better anti Slip characteristics. Thank you, The Koffler Team
I have some Roppe rubber stair nosing and I need to purchase some more. My size is 1 3/4 x 12 x 4' I have a sample and I would like you to match the color and give me the part # and price. Do you have a name and address I can send the sample?
Hi Neil, Thank you for your question. Please send the sample to the below address, also enclose a note explaining your request. KOFFLER SALES COMPANY Att: Emily 785 Oakwood Road Suite C-100 Lake Zurich, IL 60047-1524 Thank You, The Koffler Team
Rubber Stair Nosing by Roppe Roppe https://kofflersales.comp/stair-nosing-by-roppe.asp?cid=614.9 37-
Rubber Stair Nosing that brings a professional finish to any hard surface such as tile, wood, or stone. Also provides stairs protection from slips and falls. Perfect for commercial or residential indoor applications where nonslip protection is important.
- Corner Guards Wall Protectors
- Wall Guards and Wall Protection
- Wall Guard Bumpers by McCue
- Chair Rail Ideas
- Plastic Handrails - Interior
- Diamond Plate & Smooth Metal Trim | Sheets
- Wall Planks - peel and stick
- CS Acrovyn Corner Guards
- Grab Bars | Straight and Angled | Floor to Wall
- Window Sill Products
- Corner Guards Wall Protection by InPro
- Door Stops
- Wall Protection Sheets and Planks
- Wall Base | Vinyl | Rubber | Metal
- Floor Mounted Bumper Guards

- Koffler Sales, LLC
- © Copyright 2021. All rights reserved. 1-888-355-MATS
- Privacy Statement