Johnsonite Vinyl Reducers - #A519

Do you have any questions about this product? Call (888)355-6287, or email us.

I am trying to find a reducer for rolled carpet to tile in white. Which one would I use? I need about 7 feet. How to you hold it down?

Hi Scott, Thank you for your question. The reducers are glued down and the type will depend on the thickness of the 2 edges. Please feel free to give us a call after measuring your edges and we can assist you with the right choice. Thank you, The Koffler Team

The description for this product says for interior use only. Do you have a vinyl or similar reducer for exterior use? I am extending my composite deck and there is about a 3/8" difference and I was wondering if you have anything that would work for this project? I'm looking for a 10' length or bigger so I can cut it to length. Thanks, Dave

Hi Dave, Thank you for your question. Unfortunately, there is really nothing that we know of on the market similar to vinyl that will withstand the weather. However, we have had customers us this product outside with the understanding that they will have to replace it as it breaks down over the years. Thank you, The Koffler Team

Hey guys,is the ssr xxb flexible? Thanks Dave

Hi Dave, Thank you for your question. It really depends what you mean by flexible. It can not be used for a curved area. However, it's flexible enough to come in a 35ft. roll. Thank you, The Koffler Team

How wide is CRS - XX - A, Carpet Reducer 12ft?

Hi Barbie, Thank you for your question. The CR-XX-A is 1-1/2' wide x 12' long. Thank you, The Koffler Team

Hello, I am wondering if the Johnsonite Vinyl Reducers - #A519 will work with Laminate floor 1/4" to vinyle floor? Flooring has no gap between. If so, what keeps it in place? Adhesive?

Hi Barbie, Thank you or your question. Yes, this product will work with laminate floors with no gap. Please select the right profile that matches your thickness. The product is installed using adhesive. Please go to the tab on this product page titled, "Specifications" were you can view installation instructions and the proper adhesive. Thank you, The Koffler Team

I am looking for something that looks like SSR-XX-B but I need the height to be 3/8-1/2. They re-poured concrete at our community center and left a height difference of around 3/8 but your CRS-XX-B doesnt have the transition piece on top.

Hi Terri, Thank you for your question. Please copy and past these links for additional options. http://kofflersales.com/p/roppe-rubber-reducers.asp?cid=2584 http://kofflersales.com/p/wheeled-traffic-transitions.asp?cid=2584 Thank you, The Koffler Team

I was wondering how wide is the Johnsonite Vinyl Reducers - #A519

Hi Rusty, Thank you for your question. Please look at this product page in the upper right corner and you will see all the profiles and their measurements, http://kofflersales.com/p/reducers.asp Thank you, The Koffler Team

Can I get a 12 foot piece of your Vinyl Reducers-SSR-XX-B

Hi Glenn, Thank you for your question. Unfortunately, this profile only comes in 35' lengths. Thank you, The Koffler Team

What adnesive do I use for this product?

Hi Fred, Thank you for your question. Please look under the related items tab for this product. However, here is the link to the adhesive as well, http://kofflersales.com/p/stair-treads-and-corner-guard-adhesive.asp Thank you, The Koffler Team

• 

• Johnsonite® Reducer Mouldings are highly durable reducer strips for vinyl, carpet, or resilient floors of varying heights. Made of high quality PVC.

Can't find this in the stores.

Written by: - Scott 4/5/2019

5 / 5 stars

I bought this after spending almost a hundred bucks on different wood products to finish my bathroom. None of them fit right and I couldn't take them back because I had cut them to size and tried them out. This was different. It has a low profile so no-one is going to trip over it. It is easy to work with and cut to size. It took one gluing for it to set right and has been in place almost a year. My wife loves it and that makes it all the more worth while.
------------------------------------------------------------------------------

Hi Scott,

Thank you for your review. We very much appreciate your detailed feedback and hopefully this can help future shoppers. And yes, it always helps when the wife likes it as well.

Thank you,


The Koffler Team

Good product you can't find in stores

Written by: - Roger 11/3/2017

4 / 5 stars

Good product, hard to find. Easy to install, recommend using contact cement. I would have given 5 stars but shipping was a tad slow.

Good product and easy to install!

Written by: - K. Cavana 8/24/2015

5 / 5 stars

The Johnsonite Vinyl reducer ##A519 was the perfect solution for a a 1/2-inch height transition for my mobility impaired father. The 1 1/2-inch depth of the product makes it now easy for his wheelchair to traverse the 1/2-inch difference between a higher hard tile surface in one rom to a lower resilient flooring in another room. Very easy to cut and install. I predict it will last a long time!

3 Reviews

Page :    1 of 1