|Print /Email Page|
Metal Stair Nosing - #A608
- Sizes and Prices
- Related Products(4)
A professional finish to any carpet or tile stairs, while also providing protection from slips and falls. Perfect for commercial or residential applications where strong nosing protection is important.
- 4 designs
- Each order contains 2 pieces 6 ft. Rough Cut Aluminum
- 1 1/4" Spiral nails included (Except Profile C Satin Gold and all Profile E doesn't include holes and nails)
- Holes are approximately 6" apart from each other
Residential or commercial applications where carpet, tile or wood steps require a professional safety stair nosing metal finish.
- Not recommended for outdoor use.
- Constructed from high grade Aluminum
Do you have any questions about this product? Call (888)355-6287, or email us.Questions others have asked:
I have an older home built in the 1920's. The stairs are 39 inches in length. Can you provide edging in this exact size? I need 13 in Profile A.
Hi Tony, Thank you for your question. Unfortunately, we can not custom cut this product. However, it is very easy for you to do using a metal cutting Hacksaw. Thank you, The KOfffler Team
Is it possible to get a stair nosing any larger than the 6 length for an aluminum exterior stair nosing? I dont need much more than maybe 6-6 +/- (approximately)... I will measure exactly after I get your response. how my stairs are constructed I really want to cut the nosing myself and fit the full length in total to protect the edge. I am interested in...Metal Stair Nosing - #A608 - profile E. Thank you.
Hi Shaun, Thank you for your question. Yes, we can provide you a 12' piece. However since that qualifies for FedEx/UPS oversized shipment, it will be substantially higher shipping cost. If you'd like a quote, please don't hesitate to give one of our product specialists a call between 9:00am-4:00pm. Thank you, The Koffler Team
I am going to put stair nosing over vinyl. Which of your products is appropriate - vinyl, rubber or metal?
Hi Bruce, Thank you for your question. It really depends on the look you wan tot achieve. All of the material is suitable. Thank you, The Koffler Team
Do you have any stair nosing that is suitable for EXTERIOR use? I have an outdoor step that is in front of my front door that is made of wood and needs protection from wear/use.
Hi Bob, Thank you for your question. Yes, several options and here are the links to them. Please feel free to copy and paste to view. http://kofflersales.com/p/stair-treads-and-nosing-fiberglass.asp?cid=49 PLUS: All of the products on this page except A608 and A789. http://kofflersales.com/metal-stair-treads.asp Thank you, The Koffler Team
I have a carpeted stair (wool berber) and would like to use the A608 profile A on the nose of the stair. Are nails provided long enough to hold the nosing over the carpet??
Hi David, Thank you for your question. Yes, nails are provided for Profile A and should be long enough. Thank you, The Koffler Team
Can your metal stair nosing be used with laminate?
Hi Wendy, Thank you for your question. Yes, our metal stair nosing is ok to use with laminate. Thank you, The Koffler Team
What do you have for thresholds that transition from one carpet to another.having the edges butt together they end up fraying no matter how good a job or carpet.
Hi Doug, Thank you for your question. We have a large selection of carpet edging. Please copy and past this link, http://kofflersales.com/floor-edging.asp Thank you, The Koffler Team
For the #A608, Profile A, what is the spacing of the predrilled nail holes? i.e. distance from one to the next? Thanks
Hi Jana, Thank you for your question. They holes are approximately 6" apart from each other. Thank you, The Koffler Team
Creating a small stage with glued on carpet squares I need to protect the corners/ nosing. Will metal nosing work, if so any specific profile? Or do I need to look at another solution?
Hi Perry, Thank you for your call. This product would be great as a solution. As for the profile , that would be up to your personal preference. Thank you, The Koffler Team
My steps are 36" wide. is it possible to have the 6 foot lengths cut to 36"? I need to order 3 sets for 12 three foot pieces. Thanks
Hi Richard, Thank you for your question. Unfortunately, the factory will not cut the product to less then 6ft. lengths. However they can be cut by yourself or any handyman with a metal cutting saw blade. Thank you, The Koffler Team
Hello, How do you recommend attaching the satin gold stair treads to wooden stairs? can they be glued to wood? Thanks!
Hi Donna, Thank you for your questions. The all of the metal nosings on this page are attached with nails which are included. Thank you, The Koffler Team
Just finished a big flooring project in our home. Installer used shiny gold metal stair nosing. Your #A608 metal stair nosing shows a picture with a medium brown color, but the colors tab doesn't show anything close to brown. A medium brown like the picture would work well for us. Suggestions? Tom
Hi Tom, Thank you for your question. Our color tab is much more color accurate then the product images. Feel free to request a sample of one of our colors by e-mailing us at, firstname.lastname@example.org. Thank you, The Koffler Team
Hi - I incorrectly cut one of the profile D silver stair nosing I ordered. So just wondering if I can only order (1) 6' length instead of the 2 that comes in the package??? Best Regards, Charles
Charles, Thank you for your question. Unfortunately, these are manufactured in 12' lengths and we cut them in half and have to sell them as a pair. Thank you, The Koffler Team
I'm looking for a stir nosing solution that can deal with outside corners - wondering if there are corner caps as an alternative to a miter type joint. Suggestions?
Hi Chris, Thank you for your question. Unfortunately, there are no stair nosing products that we are aware of that have outside corners. Miter cuts have been the standard solution. Thanks, Ron
I have tiled some steps going to the basement, looking at metal stair nosing (profile A) and wondering if this can be glued down to tile? If so what type of glue should I use?
Hi Mark, Thank you for your question. Unfortunately, it's not recommended to be glued down. We do include holes and screws for the nosing to be properly attached to the stairs. Thank you, The Koffler Team
I have stairs that are 39" wide. I need a nose trim of 1" x 1 5/8" x 39" in aluminum. Do you have a product to fit my needs?
Hi Frank, Thank you for your question. Yes, our profile B is 1" x 1-5/8". However, the width comes in 2 pieces, cut to 6' lengths. This will give you additional material to accommodate other stairs in the future. Thank you, The Koffler Team
I am interested in the Metal Stair Nosing - #A608 in Profile C. It appears as though the available options are quantities of 2 for the 6ft rough cut sections for 64.65 each. I wanted to understand if that meant the cost would 129.30 for the two pieces. I really only need one piece of the 6ft sections. Thanks! Steven
Hi Steven, Thank you for your question. The price of $64.65 is for 2 pieces, 6' long. Typically this product only comes 12' feet long, except Koffler is the only company that pre-cuts this product in half to reduce shipping cost. Thank you, The Koffler Team
Could I get a color/chip sample of your "browns / tans" of your various metal stair tread/nose products; interested in A608 & A781 ... thank you.
Hi Glen, Thank you for your question. Yes, we will have our sample department contact you in the morning. Thank you, The Koffler Team
Is it possible to receive samples of the different metal nosings?
Hi Meange, Thank you for your question. Yes, we would be more then happy to send you samples. Please feel free to call us at 888.355.6287, or send us an e-mail at, email@example.com. Please include your address and the samples you are interested in. Thank you, The Koffler Team
Metal Stair Nosing - #A608 Hi, Looking for a bronze finished nosing for micro-cement finished stairs. Not sure on exact profile and size, but can you ship these to the UK and how long would it take? Do you carry them in stock? Thanks
Hi Richard, Thank you for your question. Yes, we can ship these to the UK. Our checkout process will give you a country option to choose from as well as a few delivery options / shipping times. Thank you, The Koffler Team
Metal Stair Nosing #A608. I am wanting to us this on my tile steps but I don't need the screw holes. Can I get them without??
Hi Susan, Thank you for your question. Unfortunately, this product is only available with pre-drilled holes. Thank you, The Koffler Team
I'd like to install a stair nosing over pressure treated exterior treads. Is there a recommended product / method for this situation - i.e. exterior application and avoiding contact of disimilar metals (aluminum / ACQ)? Thanks
Hi Matthew, Thank you for your question. You can install this product outside on pressure treated wood, as it comes with tap in nails. However, if there's extreme weather or a lot of foot traffic, I would recomend one of our other outdoor metal treads on this page http://kofflersales.com/metal-nosing.asp They are more durable and will last longer. Thank You, The Koffler Team
Hello, I would like to inquire about the product: Metal Stair nosing #A608. Is this product sold in Canada? and if so, do you have information on distributors?
Hi Dalis, Thank you for your question. We don not have any retail stores in Canada. Please fee free to order on line and we will ship it anywhere in Canada. Thank You, The Koffler Team
Hi: I would like to buy metal stair nosing, I did look at product from profile A to E, I would like to know this metal stair nosing install go over the tile or flush with the tile on my stair. Thank you
Hi Hong, Thank you for your question.The stair nosing installs over the tile. Thank you, The Koffler Team
Can I get a608 in dark bronze?
Hi Mike, Thank you for your question. No, I'm sorry it is not available in Dark Bronze. Please feel free to request samples of other colors if you'd like. firstname.lastname@example.org. Thank you, The Koffler Team
I have a curved stair and would like to know if I can specify your metal nosing product. the radius is abut 11'-0" . please let me know. Thanks
Hi Kota, Our metal stair nosing will not bend at a radius. However, please refer to our indoor Vinyl or Rubber stair nosing on this page. http://kofflersales.com/stair-nosing.asp Thank you, The Koffler Team
- Corner Guards Wall Protectors
- Wall Guards and Wall Protection
- Wall Guard Bumpers by McCue
- Chair Rail Ideas
- Plastic Handrails - Interior
- Diamond Plate & Smooth Metal Trim | Sheets
- Wall Planks - peel and stick
- Grab Bars | Straight and Angled | Floor to Wall
- Corner Guards Wall Protection by InPro
- Door Stops
- Wall Protection Sheets and Planks
- Wall Base | Vinyl | Rubber | Metal
- Floor Mounted Bumper Guards
- Koffler Sales, LLC
- © Copyright 2020. All rights reserved. 1-888-355-MATS
- Privacy Statement