Print /Email Page | |
MAPEI® Ultrabond Eco® 360 Adhesive for Vinyl Sheets, Tile and Plank - #A4618 |
-
- Description
- Sizes and Prices
- Colors
- Specifications
- Reviews(1)
- FAQ
- Related Products(5)
Ultrabond ECO® 360 is a wet-lay, pressure sensitive adhesive designed for installation of homogeneous and heterogeneous solid vinyl flooring. Ultrabond ECO® 360 has a strong, durable, moisture-resistant and alkali-resistant bond making it ideal for commercial and institutional applications. It has an excellent open time, quickly develops strength, performs well under rolling loads, and resists dents. Great for use in occupied buildings like hospitals and medical centers due to its low volatile organic content.
- Wet-lay, pressure sensitive adhesive
- For installation of homogeneous sheet vinyl (solid PVC sheet flooring), luxury vinyl tile (solid PVC tile) and vinyl plank installation
- Great for commercial, institutional and residential applications
- CRI Green Label Plus #GLP12617
- Plasticized migration resistance for use with all solid vinyl flooring
- Ready to use - no mixing required
- Available in 1 gallon and 4 gallon containers
- Brand: Mapei
- Sizes: 1 gallon and 4 gallon containers
Want more information?
See the following Product Information Sheet(s):
- High-performance adhesive for homogeneous sheet vinyl (solid PVC sheet flooring), luxury vinyl tile (solid PVC tile) and vinyl plank installation
- Plasticizer migration resistant for use with all solid vinyl flooring
- Indentation and shrinkage resistant
- Ready to use - no mixing necessary
- Quick, easy installation with trowel
- Great for interior residential, commercial and institutional applications
- Low volatile organic content
- CRI Green Label Plus #GLP12617
- RFCI IP #1, Recommended Installation Practice for Homogeneous Sheet Flooring.
- Using this product may help contribute to LEED certification of projects, see product data sheet below for more details.
- For use in interior applications only
- Do not install over any substrate containing asbestos.
- Use only when the substrate temperature is between 50°F and 90°F (10°C and 32°C).
- Do not install nonporous flooring products over nonporous surface.
- Do not apply over any cutback adhesive or any other adhesive residues
- Do not install when moisture vapor emission rate (MVER) exceeds 5 lbs. per 1,000 sq.ft. per 24 hours, when using the anhydrous calcium chloride test (ASTM F1869)
- Do not install when relative humidity of concrete slab exceeds 80% (ASTM F2170)
- All substrates must be dry and structurally sound and stable
- Suitable Substrates: exterior-grade plywood (Group 1, CC type); approved wood underlayments (per manufacturer recommendations; cement-based self-leveling underlayments and patching compounds; concrete and properly prepared terrazzo; radiant-heat systems that have been properly installed; gypsum underlayments that have been properly prepared and primed and meet ASTM F2419 requirements for compression; embossing levelers applied over existing properly prepared and fully bonded ceramic tile and fully bonded vinyl composition tile (VCT) Note: Must be one layer only.
- Before installation substrates must be clean and free of dust, dirt, oil, grease, paint, curing agents, concrete sealers, loose bonded toppings, loose particles, old adhesive residue, and any other substance or condition that may prevent or reduce adhesion.
- All surfaces must be level, even, flat and smooth prior to installation.
Do you have any questions about this product? Call (888)355-6287, or email us.
Questions others have asked:can I use product to glue vinyl sheets over asbestos tile installed in a garage?
Hi Ken, Thank you for your question. Please refer to the Product Data Sheet for complete installation instructions. The data sheet is located on this product page under the tab labeled "Specification", in the lower left corner. Thank you, The Koffler Team
Product color is as described under 'Sizes and Prices' MAPEI® Ultrabond Eco® 360 Adhesive for Vinyl Sheets, Tile and Plank Mapei https://kofflersales.comp/mapei-ultrabond-360.asp?cid=37175.0 1-
Ultrabond ECO® 360 is a wet-lay, pressure sensitive adhesive designed for installation of homogeneous and heterogeneous solid vinyl flooring. Ultrabond ECO® 360 has a strong, durable, moisture-resistant and alkali-resistant bond making it ideal for commercial and institutional applications. It has an excellent open time, quickly develops strength, performs well under rolling loads, and resists dents. Great for use in occupied buildings like hospitals and medical centers due to its low volatile organic content.
- Wet-lay, pressure sensitive adhesive
- Corner Guards Wall Protectors
- Wall Guards and Wall Protection
- Wall Guard Bumpers by McCue
- Chair Rail Ideas
- Plastic Handrails - Interior
- Diamond Plate & Smooth Metal Trim | Sheets
- Wall Planks - peel and stick
- CS Acrovyn Corner Guards
- Grab Bars | Straight and Angled | Floor to Wall
- Window Sill Products
- Corner Guards Wall Protection by InPro
- Door Stops
- Wall Protection Sheets and Planks
- Wall Base | Vinyl | Rubber | Metal
- Floor Mounted Bumper Guards

- Koffler Sales, LLC
- © Copyright 2021. All rights reserved. 1-888-355-MATS
- Privacy Statement