Johnsonite Vent Cove Base - #A506

Do you have any questions about this product? Call (888)355-6287, or email us.

Is this waterproof? I live in a townhouse and I’ve had two floodings from my neighbour. I would like to use this in my kitchen instead of the wood type baseboard, just in case there is another flooding I would like to keep the water out.

Hi Tris, Thank you for your question. Unfortunately, this will not keep the water out, it will find a way to seep through the edges. Thankyou, The Koffler Team

I think this product will work in my kitchen. My father rehabbed the kitchen and built the cabinets himself. There is 4 inches of height between the cabinet and the floor. The three in of the toe kick would be perfect to cover up some imperfections as the tile was already installed and does not come all the way up to the bottom of the cabinets, looking for something to hide this as it is unsightly. My question is it looks like I will be applying this to Wood which I think is a porous substance and would need the adhesive designed for that reason. I could not see anywhere on here whether this adhesive will work with wood so can you help me out by answering this for me. Also how hard is this to cut?

Hi CrCreampuff1, Thank you for you question. Wood substrates are OK. Here are the approved substrates, Gypsum wallboard with paper intact • Water-based paint residue over gypsum wallboard • Gypsum or cement-based wall-patching compounds that are hard, durable, well-bonded and fully cured • Exterior-grade plywood, Group 1, CC type • Other approved wood underlayments (per manufacturer recommendations) • Fully cured masonry and concrete walls Here is a link to the adhesive. The installation instructions are listed under the Specifications Tab. https://kofflersales.com/p/mapei-wall-base-adhesive.asp Thank yuou, The Koffler Team

I need something like this but the bottom part needs to be 5-6" do you have anything like that?

Hi Jill, Thank you for question. Unfortunately, we have never heard of a Toe that long. The Toe on this product is the longest we have heard of (4" (10.16 cm) high with 3" (7.62 cm) Toe). Thank you, The Koffler Team

Is the longest length 4' I need approximately 125' but am concerned about the look of all the seams

Hi Ken, Thank you for your question. I see your point, however the product is only made in 4' strips. All of our standard wall base comes in 120' rolls. Are you sure you need the Vent style cove base> If not, please visit this category page, http://kofflersales.com/wall-base.asp Thank You, The Koffler Team

Can this product be used outdoors? I'm looking for something to protect the seam line of my house from moisture and thought this might work adhered to the base of the exterior call and concrete walk. Thanks!

Hi William, Thank you for your question. It is not recommended for exterior use. The reason is due to moisture and temperature changes. It is designed to be used on interior plaster, gypsum wallboard, concrete, masonry, mineral-reinforced cement board or similar porous or non-surfaces. Thank you, The Koffler Team

• 

• Johnsonite's unique "satin finish" differentiates this rubber vent cove base from all the others. It resists abrasion, gouging, color ware, or cracking with age and is easy to maintain.

Johnsonite Vent Cove Base

Written by: - Anonymous 1/10/2018

5 / 5 stars

great services and product

High quality product

Written by: - dot 12/7/2014

4 / 5 stars

I bought this product when I saw it used in a commercial building. I have an apartment bathroom that leaked along the tub with the cheap domestic cove base. This should do the trick. I would have liked to receive a guide to installation with the shipment or at least the type of cutting tools recommended for the cutting of the item (very thick). also you sell outer corners, why not inner corners--I have 3 inner corners to deal with. Looks and feels like quality and covers the areas of potential leaking.

Hi Dorthy,

Thank you very much for your questions.

You can find the installation instructions on our website under the "Specifications Tab" of this product #A506. Here is the link to copy and paste, http://www.kofflersales.com/p/johnsonite-vent-cove-base.asp .

Johnsonite doesn't manufacture inner corners as you can make a Mitre cut that will fit within the corner. Please see the "Related Items" tab for cutting tools, or copy and past this link, http://www.kofflersales.com/p/cove-base-installation-tools.asp

Thank you,

the Koffler Team

2 Reviews

Page :    1 of 1