|Print /Email Page|
Johnsonite Vent Cove Base - #A506
- Sizes and Prices
- Related Products(4)
Johnsonite Vent Cove Wall Base is manufactured with the most advanced technology and from the highest quality materials to assure dimensional stability, precision fit, and uniform height and gauge. Johnsonite's unique satin finish resists scuffing, gouging, will not fade, discolor, or crack with age and is easy to maintain.
- 4" (10.16 cm) high with 3" (7.62 cm) toe which completely covers expansion voids and permits free expansion of the floor, while providing a finished junction between the wall and floor.
- Outside corners have 3 11/16" (9.37 cm) returns and can be adapted for either square or round corner configurations.
- All hard wood floating floor construction
- Basketball courts
- Martial Arts studios
- Gym floors
- Dance Floors
Johnsonite Vent Cove Wall Base is manufactured from a homogeneous composition of 100% synthetic rubber, high quality additives and colorants. Its unique vertical, semi-circular vents, along the back surface, permits under floor air circulation to help extend floor life for hardwood, floating floor constructions.
Do you have any questions about this product? Call (888)355-6287, or email us.Questions others have asked:
Is this waterproof? I live in a townhouse and Ive had two floodings from my neighbour. I would like to use this in my kitchen instead of the wood type baseboard, just in case there is another flooding I would like to keep the water out.
Hi Tris, Thank you for your question. Unfortunately, this will not keep the water out, it will find a way to seep through the edges. Thankyou, The Koffler Team
I think this product will work in my kitchen. My father rehabbed the kitchen and built the cabinets himself. There is 4 inches of height between the cabinet and the floor. The three in of the toe kick would be perfect to cover up some imperfections as the tile was already installed and does not come all the way up to the bottom of the cabinets, looking for something to hide this as it is unsightly. My question is it looks like I will be applying this to Wood which I think is a porous substance and would need the adhesive designed for that reason. I could not see anywhere on here whether this adhesive will work with wood so can you help me out by answering this for me. Also how hard is this to cut?
Hi CrCreampuff1, Thank you for you question. Wood substrates are OK. Here are the approved substrates, Gypsum wallboard with paper intact Water-based paint residue over gypsum wallboard Gypsum or cement-based wall-patching compounds that are hard, durable, well-bonded and fully cured Exterior-grade plywood, Group 1, CC type Other approved wood underlayments (per manufacturer recommendations) Fully cured masonry and concrete walls Here is a link to the adhesive. The installation instructions are listed under the Specifications Tab. https://www.kofflersales.com/p/mapei-wall-base-adhesive.asp Thank yuou, The Koffler Team
I need something like this but the bottom part needs to be 5-6" do you have anything like that?
Hi Jill, Thank you for question. Unfortunately, we have never heard of a Toe that long. The Toe on this product is the longest we have heard of (4" (10.16 cm) high with 3" (7.62 cm) Toe). Thank you, The Koffler Team
Is the longest length 4' I need approximately 125' but am concerned about the look of all the seams
Hi Ken, Thank you for your question. I see your point, however the product is only made in 4' strips. All of our standard wall base comes in 120' rolls. Are you sure you need the Vent style cove base> If not, please visit this category page, http://www.kofflersales.com/wall-base.asp Thank You, The Koffler Team
Can this product be used outdoors? I'm looking for something to protect the seam line of my house from moisture and thought this might work adhered to the base of the exterior call and concrete walk. Thanks!
Hi William, Thank you for your question. It is not recommended for exterior use. The reason is due to moisture and temperature changes. It is designed to be used on interior plaster, gypsum wallboard, concrete, masonry, mineral-reinforced cement board or similar porous or non-surfaces. Thank you, The Koffler Team
Product color is as described under 'Sizes and Prices'
- Corner Guards Wall Protectors
- Wall Guards and Wall Protection
- Wall Guard Bumpers by McCue
- Chair Rail Ideas
- Plastic Handrails - Interior
- Diamond Plate & Smooth Metal Trim | Sheets
- Wall Planks - peel and stick
- Grab Bars | Straight and Angled | Floor to Wall
- Corner Guards Wall Protection by InPro
- Door Stops
- Wall Protection Sheets and Planks
- Wall Base | Vinyl | Rubber | Metal
- Floor Mounted Bumper Guards
- Koffler Sales, LLC
- © Copyright 2019. All rights reserved. 1-888-355-MATS
- Privacy Statement