Do you have any questions about this product? Call (888)355-6287, or email us.

I am considering Mandalay 3" (#MW-XX-H3). But I first want to know how this product can work with walls that have bullnose corners rather than 90° corners. If it can be used on bullnose corners, can you briefly explain how. Thanks

HI Martin, Thank you for your question. You will have to make 4 custom cuts to accommodate a bullnose. There are a lot of good youtubes on this subject. Here is one, https://www.google.com/search?client=firefox-b-1-d&q=wall+base+on+bullnose+corners#kpvalbx=_2rXgX7iZGNDdtAag-5CwCA10 Thank you, The Koffler Team

Can you use Monument wall base for door casing/trim? Using miter saw?

Hi Troyanne, Thank you for your question. We would not recommend this product for door a casing/trim. Thank you, The Koffler Team

my question is for the Johnsonite Millwork Rubber Wall Base - #A508 style ATTACHE the picture shows that it has mouldings also, if I buy a box does it comes with the mouldings or do I need to buy moulding seperatly? or would it just look like the picture after instaling and the moulding is not needed. Thanks

Hi Ashley, Thank you for your question. It will look just like the picture when it's installed. Thank you, The Koffler Team

Is cost based per box?

Hi Fred, Thank you for your question. Yes, cost is based on paper box. Thank you , The Koffler Team

Hello, one of the color selection available is called unfinished (00). Does that mean you can paint over it?

Hi Caroline, Thank you for your question. Yes, the unfinished (00) can be painted over. Thank you, The Koffler Team

I am moving to a new apartment and I'm worried that my rabbits will chew the wooden baseboards. Is it possible to attach these bases to the wooden ones without destroying the existing baseboards? I don't mind if it looks a little odd.

Hi McKenzie, Thank you for your questions. It is possible to attach these baseboards to your current wooden ones. However, they will not be able to be removed as the adhesive will prevent that from happening. Also, it will for sure look a little odd. Thank you, The Koffler Team

I really like some of the styles, but is it really appropriate for residential use? Does it look like normal baseboard?

Deborah, Thank you for your question. Yes, this product is excellent for residential use and extremely easy to maintain and install. If you would like a free sample, please e-mail your request to samples@kofflersales.com. Regards, The Koffler Team

Is this product paint-able?

Hi Harvey, Thank you for your question. Unfortunately, this product is not paintable. Thanks, Ron

Hi-- We are looking to install this product in our home. Do you send samples? If so I would like to see silhouette in the color cotton; inflection in the color white; and outline in the color icicle. Thank you for your help. Rae Lynn Johnson

Hi Rae Lynn, Thank you for your question. We provide free samples. Our sample department will contact you today. Thank you, The Koffler Team

We recently ordered the #A-508 Mandalay Johnsonite Millwork rubber base 4.5" x 8'. We need 45 more feet. A box of 5 would be 40'. Can we order a box and one extra piece @ 8'?

Hi Velia, Thank you for your questions. Unfortunately, Johnsonite will not ship less then a box. If we can be of further assistance, please don't hesitate to give us a call. Thank you again, The Koffler Team

Hi I have used the 1/8" thick wall base and know how to match it in the corners, cut it so its got a smooth seam where the lengths are less than 8'. What took do you use to cut a 3/8 inch baseboard? When you are in the corners is it difficult to get it to look seamless in the corners especially when you are doing the cuts Thanks

Hi Dr. Stoxen, Thank you for your question. We would recommend one of these tools and blades. Either a Standard or Sliding Compound Miter Saw, Radial Arm Saw, or Table Saw equipped with a Carbide tip blade with 80 teeth or greater. For more installation instructions please see the Specifications Tab located on the product page. Thank you, The Koffler Team

Please respond, I'll remove this once I received your response.

Here is my response

I love the millwork rubber cove. My question is, has it ever been used as casing around the doors. If it can't why not. If it works I would like to set up getting samples delivered.

Hi Brenda, Thank you for your question. We believe the Millwork Rubber Cove Base can be used for casings around doors. Please feel free to request samples by sending an e-mail to, samples@kofflersales.com. Thank You, The Koffler Team

• 

• Johnsonite® Millwork Cove Base offers is Attaché, Delineate, Diplomat, Emissary, Envoy, Equinox, Inflection, Mandalay, Monarch, Oblique, Outline, Quarter Round, Reveal, Silhouette, Ambassador. All styles are highly durable and extremely flexible, allowing for easy installations around columns, corners and architectural curves.

Only Place with a Match

Written by: - Aaron 9/25/2017

5 / 5 stars

Had this installed years ago in different building and this the only place to find matching product!

Worth the price

Written by: - RestoGuru 1/20/2017

5 / 5 stars

I deal with water damaged homes/ commercial buildings for a living, it says something about a product that is salvageable( johnsonite base) when everything else is moldy, wet and to thrown away. Though i do reccomend if you are trying to match color , call and get some samples sent to you quickly, as they have so many colors it can be risky.

Great Product!

Written by: - bbuskett 1/18/2017

5 / 5 stars

Installed about 900 linear feet of the molding. It looks fantastic. I am getting nothing but compliments on it. It adds so much to the area. This looks just like wood molding.

Unique molding!

Written by: - builder 10/1/2013

5 / 5 stars

Simply a well made, durable, and flexible base molding. I have never seen this high quality product at the retail store level. It was offered in a variety of depths and chose mine with the necessary .50" depth to cover vinyl floor planking. There was an excellent video available on how to make the necessary cuts for inside corners and elsewhere.
Really the only issue was color choice; found my computer's calibration varied greatly from the actual color delivered. Changed to wall color to work with the base molding. Perhaps actual product samples are to be made available?

4 Reviews

Page :    1 of 1