InPro® Corner Guards Woodland - #A680

Do you have any questions about this product? Call (888)355-6287, or email us.

Questions others have asked:

I have a vanity with 135° out side corners that are made with printer wood surfaces and they are showing damage. I was looking at your Inland Corner Guards. Ideally I need a 3/4 x 3/4 overlap. The 1 1/2 inch will interfere with the door. Is the 90° flexible enough to force into a 135° position. If not do you have a suggestion? Can the 1 1/2 inch be cut back.

Hi Lawrence, Thank you for your question. Unfortunately, the 90 degree is not flexible enough. We have one option and that is the 1" x 1" clear adjustable angle located on this page, https://kofflersales.com/p/corner-guards-clear-and-colored.asp?cid=56 Thank you, The Koffler Team

---

Can the InPro Corner Guard be use outside? Thanks

Hi Dave, Thank you for your question. Although we don't recommend it, we have had customers who have installed them outside in moderate whether climate. Thank you, The Koffler Team

---

What is the thickness of the material on these corner guards? Specifically looking at the 1.5" and 3/4". Thanks.

Hi Jeremy, Thank you for your question. These corner guards are .080 or 2mm thick. Thank you, The Koffler Team

---

Hello. I'm interested in the 3/4 x 3/4 InPro Corner Guard - A680. It comes in a "peel & stick" or an "undrilled" style. Does the undrilled style simply mean it doesn't have any adhesive tape?

Hi Michelle, Thank you for your question. The undrilled style means there is no peel and stick adhesive and no holes for screws. Thank you, The KOffler Team

---

do you offer matching 90 degree corner pieces in the A-680 line. I need to go around four corners. Thanks

Hi Richard, Thank you for your question. Not quite sure what you mean by 90 degree corner pieces. If you're talking about top and bottom caps. We do offer it in this model, https://kofflersales.com/p/inpro-woodland-corner-guards.asp?cid=2590 Thank you, The Koffler Tea

---

Interested in 3/4 X 3/4 X 12 feet corner. Our current color name is Cherry Charcoal Glaze, but can't find that color. Can you send a small sample of Honey Nut and Amber Cherry so we can compare with our older kitchen upgrade. Many thanks, Sami Mehmed Jr.

Hi Sami, Thank you for your question. We can certainly send you a free sample of the listed colors. However, can you please send your request along with your address to samples@kofflersales.com Thank you, Tha Koffler Team

---

Can the Woodland corner guard A680 able to flex enough to be used on a curve. Is it possible using a heat gun to soften the material to follow a sweeping radius? Or do you have another product that is recommended or flexible enough to be used in that application?

Hi Jeff, Thank you for your question. Unfortunately it can not be curved even with a heat gun. Here is a couple of corner guards that are a bit more flexible of, please copy and paste these links, https://kofflersales.com/p/johnsonite-millwork-corner-guards.asp?cid=56 https://kofflersales.com/p/inpro-flexible-corner-guards.asp?cid=56 Thank you, the Koffler Team

---

I see that the wood grain runs the length of the corner guard. Is it possible to obtain them where the wood grain runs up and down instead?

Hi, Thank you for your question.The wood grain can only be selected to run in one direction and that's in the direction of the length of the guard as the image shows, top to bottom. Thank you, The Koffler Team

---

Hi I am looking for InPro® Corner Guards Woodland - #A680 3/4inchx3/4 inch. I have two question 1. Can you send a sample fro that guard? 2. Can this product be used outdoor? Thanks Dave

Hi Dave, Thank you for your question. Unfortunately, this product can not be used outdoors. However, we can provide free samples, please feel free to send your request along with your address to samples@kofflersales.com Thank you, The Koffler Team

---

I would like a sample of the 1.5 X 1.5 faux wood corner guard in American Walnut and Coffee Bean, 5486 N Henderson, Davison, MI 48423. Thanks

Hi Roger, Thank you for your question. We will have our sample department send your request today. Thank you, The Koffler Team

---

Could I get a sample of the Faux Wood Corner Guard, 3" x 3", Santa Rosa Oak. 17717 Eidelweiss St NW Andover, MN 55304 Thank you

Hi Toni, Thank you for your questions. We will have your sample sent out tomorrow. Thank you, The Koffler Team

---

We are trying to cover bath tile that meets drywall at a corner. Can we paint the inpro corner woods to match the wall paint? Thanks.

Hi Renee, Thank you for your question. Unfortunately, you can not paint this product. It is a faux wood corner guard made from plastic. If you are looking to mount corner guards on drywall and paint them, here is a perfect option. Please copy and past this link to view our Paintable Corner Guards, http://kofflersales.com/p/corner-guards-plastic-paintable.asp?cid=56 Thank you, The Koffler Team

---

Hi. I was wondering how well the peel and stick works with these? Have you had any issues with them not sticking long? Also I would like to request some samples if possible of any of the cherry colors. I believe that is Amber Cherry, Boston Cherry, Crown Cherry and Shaker Cherry. Thanks

Hi Traci, Thank you for your question. They have been very well received and we haven't had any issues with the peel and stick adhesive. However, for 2" guards and wider, we do recommend for extra strength to purchase the un-drilled and use adhesive to apply them. Thank you, The Koffler Team

---

I am on our Building and Grounds Committee at church and our preschool needs several corner guards. Could you please send us a small sample of what the Bullnose corner guards are like (just a few inches of one). Also, we'd really appreciate it if you send us color samples of Wisconsin Oak, Santa Rosa Oak and Chatsworth Oak. Thank you so much! Cindy Bell W8615 County Road C New Lisbon, WI 53950 608-427-2255

Hi Cindy, Thank you for your question. Yes, our sample department will send out your samples tomorrow. Thank you, The Koffler Team

---

Hi, I'm looking at replacing white corner guards with a faux wood that matches my trim. Is it possible to get some small samples so I can properly match? I'd like to have a sample of the Boston Cherry, Shaker Cherry and the Chatsworth Oak, if possible. Thanks in advance for your response. My address is as follows: Rick Whitehead 2155 E 2200 N Layton, UT 84040

Hi Rick, Thank you for your question. Sure no problem, our sample department will contact you. Thanks, The Koffler Team

---

Will you please send me the following samples: honey nut amber cherry fruitwood Thank you!

Hi Patty, Thank you for your question. Our sample department will send you samples today. Thank you, The Koffler Team

---

I want to guard the corner of a countertop from the door hitting it - do you have corner guards that are only 2-3 inches in length (top of counter corner to bottom of counter corner)(I have to measure still to gert exact length)? Thanks! Rachel

Hi Rachel, Thank you for your question. You can either cut this product to the length you need with a fine tooth saw. Or please look at the bottom of this page at another option. http://kofflersales.com/safety-guards.asp Thank you, The Koffler Team

---

I need to cover at least 1-1/8" of my outside corner. Is the inside dimension of the 1-1/2 size large enough to accomplish this? Could you please send me the following color samples? Beechnut, Fruitwood, Caramel Bamboo. My address is 5 Griffin Road, Hudson NH 03051.

Hi Jim, Thank you for your question. Yes, the 1-1/2" should be enough to cover a 1-1/8" outside corner. Also, we will send you the color samples at the beginning of this week. Thank you, The Koffler Team

---

I have a rec room restoration project and I m trying to match a pool table that s already in there. Could you please send a sample of Santa Rosa Oak and Chatsworth Oak? Thank you! Adam

Hi Adam, Thank you very much for your question. Our sample department will get right on this. Thank you, The Koffler Team

---

I work at interior design company and am looking for the material for restaurant project. Can I get a few color samples for Inpro Corner Guards Faux Wood Grain? I would like to get samples of Coffee Bean, Honey Nut, Fruit wood, and Wisconsin Oak. Could you mail the sample to 1140 Avenue of the Americas 9F, New York, NY10036. This address is my office and the company name is National Alliance. I need them ASAP. If there is somewhere I can pick up the sample, please let me now. Thank you.

Hi Eriya, Thank you very much for your question. Our sample department will get right on this today. Thank you, The Koffler Team

---

I would like to order about 20 of the 8ft. faux wood wall corner protectors. Do you have a sample book of the faux wood colors for wall corner protectors? I want to try to make them to my blinds. My address is 1062 maple drive, kittanning, pa 16201

Hi Josh, Thank you for your question. We will have our sample department contact you and to handle your request. Thank you, The Koffler Team

---

Can you send me samples of Wisconsin Oak, Santa Rosa Oak, and Chatsworth Oak?

Hi Jeremy, Thank you for your question. Yes, we will send you the samples you requested. Thank you, The Koffler Team

---

Can you send samples of this corner guard in Crown Cherry, Coffee Bean, Shaker Cherry and Boston Cherry Thank you.

Hi Shaneka, Thank you very much for your question. We will have the requested samples sent to you. Thank You, The Koffler Team

---

I am a federal government employee working on a facilities project and will like to receive samples for potential business. Specifically in Inpro® Corner Guards Faux Wood Grain - #A680: Crown Cherry Coffe Bean Shaker Cherry Boston Cherry Sent to: OFA ICE 500 12th St. SW Stop 5704 Washington D.C 20536 Thank you.

Hi Shaneka, thank you very much for your question. We will send you the samples you requested. Thank You, The Koffler Team

---

I am professional architect. Can I have a few color samples for the Inpro Corner Guards (bullnose as well), faux wood grain? I am specifically looking for color samples of the Shaker Cherry,Boston Cherry, Amber Cherry, Honey Nut. If possible you could mail the samples to: Leon Kravchenko, 2930 West 5th Street Apt 22K, Brooklyn, NY 11224

Hi Lean, Thank you for your question. Yes, we will have your color samples sent out to you at the beginning of next week. Thank You, The Koffle rTeam

---

I am inquiring to see if I could get a few color samples for the Inpro Corner Guards, faux wood grain. I am specifically looking for color samples of the Crown Cherry, Shaker Cherry and Boston Cherry. If possible you could mail the samples to: Lisa Maurer Rosemount Parks and Recreation 13885 South Robert Trail Rosemount, MN 55068

Hi Lisa, Thank you for your question. We will have samples sent out to you. Thank you. The Koffler Team

---

I have an expresso-colored dinette set that is counter height. So the chairs are a little taller than the regular dinette set chairs. I am wondering if this product would: 1. work on the chair rungs to protect from scraping the wood when people rest their feet on them 2. match the color 3. stick to the wood without causing permanent damage with your peel & stick version Thanks for any information you can provide. Just an aside, my chair rungs are rectangular in shape and measurements are about 16.25 inches long, 0.75 inches wide (top surface), and 1.25 inches tall (front surface). Dena Jolissant

Hi Dena, Interesting questions! 1. Yes, they would protect the chair rungs from scraping. 2. As for the color match, please choose a couple of our closest colors and we can send you a sample. Here is our link to sample requests. samples@kofflersales.com 3. It should stick without causing permanent damage, but we can't guarantee that for sure. It all depends on the type of wood finish. When requesting a sample ask for it with adhesive and test a small area. I would suggest our 3/4" x 3/4" x 4'

---

InPro® Corner Guards Woodland InPro https://kofflersales.comp/inpro-faux-corner-guards.asp

• 

• Faux Wood Grain Corner Guards are unmatched in wood grain beauty. Easy to clean, permanent color, and easy to install.

Sort By: Newest First Oldest FirstHighest RatedLowest Rated
20 Reviews		Page :    1 of 2    12

HONEY NUT CORNER GUARD

Written by: - AH 12/5/2019

5 / 5 stars

Great product matched really good with what I need it for and great quality, I bought close to 45 12' corner guards to do my project and we are happy to be able to find the right product.
--------------------------------------------------------------------------------

Hi AH

Thank you for your review. We very much appreciate your feedback on how well this product matched, and in general it's high quality.

Thank you,


The Koffller Team

Excellent product

Written by: - Trace 3/23/2018

5 / 5 stars

So easy to put on and they look great

Bullnose corner guard

Written by: - LarryK 12/6/2017

5 / 5 stars

This corner guard was exactly what I needed. The fit was perfect and the adhesive strips made for an extremely easy installation. Great product.

Much better than I expected

Written by: - J! 10/7/2017

5 / 5 stars

I thought the corner guards would be pretty thin and flimsy. But I was pleasantly surprised to see that they were thick and sturdy. They are a very nice product all the way around.

great products

Written by: - mustang50 7/14/2017

5 / 5 stars

great products, and Barb is great to deal with.

Fabulous wall corner

Written by: - SACRN 5/1/2017

5 / 5 stars

The corners look so good and match the kitchen cherry cabinets perfectly. Thank you.

Easy to apply

Written by: - Donna 4/3/2017

5 / 5 stars

These corner guards were very easy to apply and they look awesome!! I am so happy with them....and they match the rest of our wood trim in the house. The cat is disappointed because she cannot scratch them very well....but that is a huge plus for me!! Thanks so much for the great product!!

Very Nice Quality

Written by: - BHome 1/1/2017

5 / 5 stars

I am really impressed with this product - it exceeded my hopeful expectations. I am not using it for it's original purpose, however. I just purchased a new crafted wood platform bedroom set. We live in a small place, so my computer desk and chair are at the foot of our bed. I looked around the internet to find something unobtrusive to protect the bottom of my bed from the wheels of my desk chair, and found this product. The width was what I needed and the wood design I chose actually matches the oak on my bed almost exactly. You can hardly notice that it is there and it really stands up to the scrapes and bumps of the wheels. A quality product.

Looks Great

Written by: - Traci R. 8/5/2016

5 / 5 stars

We were really happy to get these corner pieces. They matched up pretty well with our real wood accents on our walls and now be don't have banged up corners anymore. The pieces were really easy to cut down to fit the length of our wall so we didn't have to get custom pieces made. My only advice if you do the peel and stick is to pull the backing off slowly or else you might rip it.

Great woodgrain match for Kitchen Cabinets

Written by: - Customer 6/23/2016

5 / 5 stars

Was putting my house up for sale and the chipped corners of the 20-year-old kitchen cabinets looked terrible. The woodgrain match was nearly perfect and transformed look of the kitchen. The house sold in 2 days.

None of this would have been possible had it not been for the patience and assistance of the wonderful Sample Lady. I was going to choose a different woodgrain (based on the pictures) than I ultimately purchased. I saw it in the samples she provided and it was way off. I would have wasted a lot of time I didn't have and been very unhappy. So, THANKS SAMPLE LADY!!

20 Reviews

Page :    1 of 2