A673 KSC CORNER GUARD INSTALLATION INSTRUCTION

 

 

USING PRE-DRILLED MOUNTING HOLES W/PROVIDED HARDWARE

To install KSC Corner Guards, first place each guard on the wall at its desired location and mark the wall with a pencil at each mounting hole. Remove the guard and drill a small hole at each mark. Wipe down the wall to remove any dust and/or plaster. Replace the guard and attach to the walls with supplied screws.

 

 

 

 

USING LIQUID NAILS (NOT INCLUDED)

Make sure wall is clean and dry, and then follow the instructions provided by Liquid Nails for installation. Using liquid nails is not recommend on the clear lexan corner guards.

 

 

 

 

SELF-ADHESIVE CORNER GUARDS

Make sure the surface you are applying the adhesive to is smooth and clean. The self-adhesive corner guards may not stick to rough or wallpapered surfaces. Clean the wall with a damp sponge and dry thoroughly before applying the self-adhesive corner guards.

 

 

 

 

A673 KSC CORNER GUARD MAINTENANCE

A damp cloth removes most dirt and stains. For more stubborn stains, a good household solvent will suffice.