Removal Instructions

 

A636 Anti-Slip Abrasive Tape

A637 Anti-Slip Abrasive Tape

 

 

Product Removal

Anti-Slip Abrasive Tape products are not easily removed once bonded. The adhesives used in Abrasive Tape products are durable and strong. Suggested removal procedure:

1.              Using a 'putty knife' or similar tool, insert under the edge of the tape or tread, and pry upwards to lift edge. Continue around all edges of the tape or tread. Use a 'pliers' or similar tool to grasp the open edge and pull (at a 180 degree angle) back over the tape or tread.

2.              Use a Citrus Base Industrial Cleaner chemical to soften any adhesive which may remain on the substrate. Clean residue off, rinse, dry and reapply new Pres-on-Step by 3M tape or tread.